Objetivo
Content of the project is surface hardening by means of diamond coating.
To enable the SME's which participate in this project to share the market in selling high qualitative cutting tools the deposition chamber system DIC-2 has been designed, constructed and built.
Additionally a new technique for the deposition of diamond and DLC-layers has been developed and introduced. This technique is based on a modified acetylene-flame CVD which uses additional plasma supported PVD for coating superhard material on cutting tool surfaces. The deposition conditions for diamond and DLC coatings on cutting edges and other tools have been studied in a wide range of coating steps, which are necessary for a successful deposition of diamond.
Practical surface investigations (on adhesion strength, layer thickness, on surface topography with Atomic Force Microscope (AFM) and SEM, on chemical structure with RAMAN analysis) and cutting tests (tool wear) with coated tungsten carbide inserts have run parallel to the optimisation of the coating process, in order to enable inferences to be drawn for interpretation of the process (temperature, duration, gas activation etc). This feedback of the test results to the coating process was of high importance with regard to the specific cutting process demands like improved adhesion, layer thickness, homogeneity and surface roughness, of the coated inserts.
The experimental tests performed show that diamond/DLC-coated inserts used for cutting operations could not deliver the expected performance. Only two charges show a satisfactory result. The Raman-analysis documents that there are diamond-like structures on the inserts. But it was impossible to reproduce these good coating results. The aim of the programme, the development of a controllable coating process for diamond coating was not reached during the project duration. Due to the problems with the adhesive strength of the layers the cutting tests with most of the inserts just provide information about the flank wear of the substrate material. The strong contamination with carbon on the layer leads to irregular structures of the layers. The adhesive strength is not guaranteed. It can be noticed that up to date this coating process does not produce satisfying layers, and has to be improved in the near future by further investigations.
Specific fields of use are :
- Cutting tools for use in UP (Ultraprecision) technology
-Cutting tools for use in macrocutting
- Probing/touching heads in fine measuring techniques
- Highly wear-resistant machine elements etc.
Because of its extreme hardness combined with chemical stability and excellent thermic conductivity, diamond is, of the known material, an ideal substance for wear-reducing coatings.
For the process the acetylene flame CVD is proposed. This process offers the expectation that coating depths in the nanometer range as well as those with a higher removal rate are possible. The required expenditure for this process is relatively low. It has the potential of making it possible for small and medium-sized firms to produce the tools described in the following. A specific feature of the process is that its limitation to small surfaces does not conflict with the selected uses. The high temperatures regarded up till now as necessary can be avoided in the selected uses through the choice of tool materials.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias físicas astronomía ciencias planetarias geología planetaria
- ciencias naturales ciencias físicas óptica microscopía
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
- ciencias naturales ciencias químicas química orgánica compuestos alifáticos
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
71563 Affalterbach
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.