Objectif
The project major technical achievements were:
Wax microparticles produced in the spray dryer and containing less hydrophilic hardeners than ammonium sulphate, showed reactivity at 80 C identical to it and the hardener release at 40 C (pot life) was significantly delayed by the encapsulation. Although these hardeners were more reactive than ammonium sulphate, it was made possible to achieve latency significantly larger than that of ammonium sulphate by employing encapsulated formulations of the above hardeners into wax microparticles.
Wax capsules containing a hydrophilic hardener, which were produced using the hot melt fluidized bed process, provided latency behaviour better than ammonium sulphate and have been used both at lab and at the industrial scale in particleboard and plywood production. Using urea as a base core material, the capsules behave both as resin hardener and as formaldehyde scavenger, thus solving simultaneously the formaldehyde emission problem. The method is very flexible and can be used for the confinement of either liquid or solid hardeners/formaldehyde scavengers or any other useful ingredients, e.g. fire retardants.
Several compounds of promise were identified as potential latent hardeners and studies on the production of particleboards using these hardeners were carried out.
The use of superabsorbent polymer in cork production led to a significant reduction of the residence time of the cork blocks in the press, without significant loss in block properties. This reduction amounts to about 27% for pilot scale blocks and about 18% for industrial scale blocks.
Engineered panel products are made with particles or fibers bonded together with an adhesive under controlleed heat and pressure. Urea-formaldehyde water-based dispersions are the most widely used binders. The cure of the adhesiveis accomplished by the use of catalysts (usually called hardeners) which are conventionally salts generating acidity. The final polymerisation of the adhesive occurs in the hot press and is one of the critical steps in the manufacturing process. If the adhesive cures at any point in the manufacturing sequence other than in the hot press where the mat is compressed to the desired thickness, a weak product (referred to as precured) will be produced. With conventional hardeners some precure is inevitable. The proposal addresses this problem. A latent catalyst will be developed, which will be active at the pressing temperature (100°C) but inactive at lower temperatures. This catalyst will allow faster curing times and therefore shorter press-cycles (and increased productivity). Moreover, by using with the hardener a chemical that takes up water, we solve the problem of high panel moisture content experienced in many mills. The water interferes with the condensation polymerisation reaction of the curing resin, acting as a retarder. Also, the press time has to be sufficiently long to allow the steam to escape smoothly to prevent delamination. By removing part of the core moisture the new hardener will allow shorter press-cycles without delamination.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique ingénierie de fabrication
- ingénierie et technologie ingénierie des materiaux fibres
- sciences naturelles sciences chimiques chimie organique aldéhyde
- sciences sociales économie et affaires économie économie de la production productivité
- sciences naturelles sciences chimiques catalyse
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
57011 GEPHYRA THESSALONIKIS
Grèce
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.