Objectif
To design and construct a 200 KVA energy efficient 3-phase, 3 limb transformer cores, and to incorporate new features in its design which will prove beneficial in energy saving.
Work has been completed on the assessment of the various methods of assembling magnetic cores in order to choose a transformer design which will make the best use of core material magnetic properties (most present commercial designs cause a high building factor which creates extra core losses in a transformer and hence does not make the best use of the ecellent basic magnetic properties of core materials).
During this period the final design of a novel 200 KVA core has been finalised.
Investigations and discussions with designers at the South Wales Transformers Ltd led to the conclusion that a notched yoke, 3-limb transformer of 200 KVA rating should be assembled at the Wolfsen Centre, prior to final coil winding etc. at the transformer plant. Before final assembly the optimum stagger length should be confirmed by preliminary measurement of losses and magnetising current in the transformer/using temporary windings.
Laminations were staggered layer by layer in one core in order todemonstrate the benefit of the technique on core efficiency : optimum conditions were obtained with a stagger length of 1.0 cm with 15 cm/laminations./wide. Core loss was reduced by 5-10%. Other laminations were cut at angles to the rolling direction and re-assembled in order to demonstrate benefits which may be obtained using this technique.
The transformer design for the demonstration had a core weight of 315 Kg. The guaranteed loss of the manufacturer's conventionally designed equivalent transformer was 330 W. The new design produced a loss of 230 W (a capitalised loss saving of around 300 UKL for the 200 KVA transformer).
Core laminations have been cut from laser scribed high permeability grain oriented silicon iron. The laminations were cut from a mother coil 0.23 mm thick, from which strips for Epstein and single strip testing were also cut. The power loss and magnetic induction of the Epstein strips over a range of flux densities from 1.7T to 1.8T have been measured.
With all basic magnetic measurements on core starte steel completed, final testing of the 200 KVA core at the end of March 1986. Testing of various packets of the core separately with different stagger lengths was performed before sending the assembly to South Wales Transformers for the completion of assembly and acceptance testing.
The completed transformer was tested and installed on site of a user. The transformer has been operating satisfactorily at its low rating.
This is a 3 phase project for the design and construction of an energy efficient 200 KVA transformer. In phase 1, cut-laminations were purchased for assembly in new core configurations. The work in this phase focused on assembly design. Two improvements are proposed:
(1) staggering layers of laminations in a core, and,
(2) cutting laminations at small angles to the rolling direction of the sheet before assembly.
During phase 2, the proposed improvements in the new core will be evaluated. Arrays of thermistors are installed on the laminations in order to monitor the variation of localised loss with stagger length. Variations in the grade of steel used in the yoke and limb laminations will also be tested. Once a final design is developed based on phase 2 test results, phase 3 - the installation of the newly designed core in a working transformer site - will commence. The project is now in the final stage of phase 2.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
CF2 3AD CARDIFF
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.