Objectif
Energy savings through hot charging slabs into the mill dispite the problems of a variable order book. The aim is to maximise the heat contained in the hot slabs, thereby reducing the energy consumption of the reheating furnaces.
This is achieved by :
- A modification of the metal management procedure between steelworks and the rolling mill by :
- gatherings or orders
- gatherings of slabs
- time schedules
- Transfer systems of hot slabs towards the processing site
- A processing site where all the operations on the hot products will be carried out by :
- new oxy-cutting yards
- mechanical deburring device
- Computer control of the reheating furnaces.
The project was represented for a 950000 tons annual total production, among which 450000 tons of hot feeding charge. The expended savings amounted to 6158 TOE/year or 0.137 TOE/hot rolled ton.
Savings achieved.
With cold slabs the energy consumption is around 350 therms/t.
The savings achieved by hot charging are :
At the furnaces
By using higher charging temperatures with mother slabs 172 therms/t, daugther slabs 76 therms/t making an average saving of 90.4 therms/t.
Using the computer
By reducing exhaust temperature and achieving correct slab exit temperature 17.3 therms/y.
At scarfing
There has been a decrease in scarfing requirement following the reduction of cooling cracks. This results in a gain of 5 kg of steel per tonne. The energy saved on the meltin of this steel is 1.4 therms/t. As there is less scarfing, a saving is made in the combustion of the scarfing torches of 1.9 therms/t.
At flame cutting
The higher is the slab temperature the higher is the torck speed. Saving is estimated at 1.8 therms/t.
The positioning of the torches by measuring the slab temperature has resulted in a gain of 6.4 kg of steel per tonne with a resultant saving on reheating of2.2 therms/t.
The total of these savings amounts to 115 therms/t.
Degree of success : 84 %
In the future it is intended to further improve the scheduling from the continuous caster to the rolling mill by approximately 15 %, ie for a production of 870000 t/year and 45 % hot charging a saving of 50 Mtherms/year or 5000 TOE/year could be achieved.
Problems : The hot flame cutting and the mechanical deburring devices are original techniques. These two installations required adjustement periods longer that what was foreseen.
The experience acquired during the gradual putting into action of this project required the modification of several initially foreseen stages such as.
So it was that several electromechanical rotating grippers for the handling of hot slabs had to be replaced by a set of non rotating mechanical grippers.
Furthermore, the heat insulated casings which did not bring the foreseen savings were replaced by a computerized running between the continous casting and the rolling mill, which allows a maximum reduction of the intermediate storage time.
To use at the maximum the heat (calories) contained in the hot slabs and consequently reduce the heat consumption of the reheating furnaces.
This will be achieved by :
1. A modification of the metal management procedure between steelworks and the rolling mill.
2. Transfer systems of hot slabs towards the processing site.
3. A processing site where all the operations on the hot products will be carried out.
4. Heat consumption in the reheating furnaces has been reduced by using a computer controlled regulation system.
The project is in the building phase, with a new feeding system under consideration. In view of the importance and the cost of this system, the initial study is being repeated and the system should be operational by mid-86.
Based on 1984 data, it is estimated that the total energy saving will reach 0.0137 TOE/T of steel (against a forecast of 0.0136 TOE/T).
The volume to be handled under this project depends on the customers orders and to which extent they can be grouped. To improve this, a special planning team has been set up.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
1360 TUBIZE
Belgique
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.