Objetivo
To demonstrate that an existing scrap aluminium melting system can be improved to use less energy, generate less pollution and as a result achieve a better yield.
The project comprises three features:
1. a recycling of exhaust fumes to preheat the aluminium scrap in order to save energy and increase the throughput.
2. a molten metal recirculation system to save energy and do away with the need to use molten salt to prevent oxidation
3. a continuous homogenising system saving energy and improving the metallurgical properties of the aluminium.
1. The preheating of scrap aluminium using the otherwise wasted exhaust fumes takes place in separate preheating furnaces.
Each furnace consists of two compartments, one to preheat dirty, painted and oiled scrap and one to preheat clean scrap. Gases from the preheating steps are then burned to eliminate pollution in an after-burner and can be recycled again.
The preheating furnace body is made out of steel plates, reinforced with profiles and lined with refractory material, with in- and outlets for the hot gases. These are built so that the flow staysturbulent at all times in order to increase the heat transfer to the charge. The whole system is to be controlled by an extended pressure control system.
2. The system will use molten metal to heat the scrap by contact rather than heat conductivity and convection. The molten metal will be recirculated by a pump and requires a low temperature than otherwise. The absence of molten salt also diminishes the dross and therefore increases the yield.
This metal recirculating system consists of a well which is built on to existing melting furnace, in contact with both the heating chamber and the melting chamber by means of ducts in the wall. It is fitted with a commercially available pump.
3. To obtain an homogenous metal matrix the aluminium has to be kept at a temperature just below the melting point for a certain time. Unlike in existing systems where billets are charged batchwise in the furnace with heat-wasting support pieces and heatwasting openings of the furnace, in this system billets are charged separately depending on shape and homogenising requirements.This is electronically controlled. Heat is provided by a jet heating system.
Total cost is estimated at Hfl. 2.8 million. Energy saving 800 TOE for
10,000 t/production. Metal saving: 190 t.
This system should be easily applicable to other scrap aluminium melting systems.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
6620 AA DREUMEL
Países Bajos
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.