Objectif
To evaluate a new drying process for beet pulp using a fluidized - bed under pressure, for the production of fodder pills. Energy savings were estimated at 75% of the dryer's actual consumption.
The experimental plant demonstrated good drying capacity, increasing to an evaporation of water at more than 1 T/h, and the dry content of produced pulp exceeded 90%.
The results achieved met the expectations for the basic principle of the drying plant and the constructional working out. As the plant has only very few mechanically movable parts it can be expected that the plant will only result in limited costs of maintenance.
The drier has been made in such a way that minor particles that dry very fast have a shorter stay than larger particles. The stay will only last for 4-6 min. As no oxygen is present during the drying it is possible to have a light product with a pleasant look. The drying process does not cause any admission of heavy metals or unburnt hydrocarbons to the dried material unlike the conventional drum-driers.
As the steam from the pulp can be utilized there is no impact on the external environment unlike the drum driers with chimney for steam with dust.
On the basis of successful tests a larger plant capable of coping with 6 T/h has been constructed.
The pressure-drying plant was started on October 7, and the last day of production was December 22. During this period approrox. 300 tons of dried pulp with approx. 90-94% dry substance were produced. When the plant was operating, approx. 360-390 kg dried material per hour were produced.
The achieved product quality is better than the one from the traditional drying plant, because no soot particles (oil and coal-burning drying plants) or heavy metals are deposited on the dried material.
Owing to the working out of the plant, no discharge of dust particles will take place from the plant into the atmosphere.
The dust produced during the drying is mixed partly with the product and partly with the condensate. When the plant is placed in a sugar factory, this dust will be led back into the process. On the contrary the plant could not come up to expectations for the desired energy saving.
An experimental cellular Fluidised Bed replaces the rotary drum dryer and the exhaust fluid at higher temperature, pressure and calorific content may be reused.
Superheated steam produced by passing through a heat exchanger provided with high pressure steam flows through the fluidised bed, and the low pressure steam leaving the plant may be reused in the factory rather than oil.
In addition to the energy saving the method will reduce the impact on the environment, and in comparison with other traditional methods of drying the product quality will be improved.
Superheated steam enters at the bottom of the dryer and passes through a perforated plate to that part of the dryer where the drying of the beet pulp takes place. The dryer is divided into 16 cells by means of vertical plates which radiate from the centre pipe. The material is led into cell 1 and has to move through the cells to cell 16. Here it falls into a screw conveyor which carries it to a rotary valve. In the cells, thesteam coming from below will lift the particles and set them moving. The passage from cell to cell takes place mainly through holes in the cell walls just above the perforated plate. The placing and size of these were adjusted at the beginning of the operation in order to achieve the right filling of all cells.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
4900 NAKSKOV
Danemark
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.