Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2022-12-27

MILL BLOOM REHEATING FURNACE CONVERSION TO REGENERATE BURNER FIRING

Objectif

To demonstrate the applicability of regenerative burners to large reheating furnaces in order to realize the potential for additional energy savings from their type of firing compared to the more traditional systems. The project involves the conversion of a natural gas fired steel bloom reheating furnace from conventional hot air burner firing, utilizing an external waste heat recuperator, to regenerator beds.
The projected annual energy savings resulting from the project are 3,136 TOE by reduction of specific energy consumption 24%.
Successful project especially in the field of NOx emissions. The fuel economy was measured at 15.4% against 24% predicted. Potential for further improvement up to 20% has been identified.
An existing walking-beam type furnace, of 135 t/hour nominal capacity and a thermal input of 255 GJ/hour, will be modified. The furnace is top fired at the charge end and top and bottom fired at the discharge and which is water-cooled.
The modification is centered around the replacement of the existing medium velocity burners by regenerative ceramic aburners (RCB), which are designed to provide air preheats normally about 100 deg.C below furnace temperature, i.e. up to 1,200 deg.C exhausting waste gas at 100-200 deg.C. The RCB consists of a compact regenerator coupled to a refractory lined burner which doubles as an exhaust duct. One RCB unit comprises of two regenerators, two burners, a reversing valve and an associated control.
Cold air is preheated by the first regenerator and used by the first burner.
Exhaust gas is drawn through the second burner and associated regenerator, to preheat the packing and then exhausted to atmosphere. When the second regenerator is charged, the process is reversed.
The higher air preheats and lower waste gas temperatures achieved give higher efficiencies and lower fuel requirements, compared to the conventional system.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

DEM - Demonstration contracts

Coordinateur

British Steel plc
Contribution de l’UE
Aucune donnée
Adresse
Moorgate
S60 3AR Rotherham
Royaume-Uni

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée