Objetivo
To demonstrate the fuel savings achievable in the incineration of sulphur recovery unit tail gas by the use of a forced draught swirl combustor with a recuperative heat exchanger preheating the tail gas. Fuel savings were expected to be worth L 55000 per year with a payback periode of 2.2 years.
The abandonment of the project was caused by serious delays which led to a decline in the value of the market for such equipment to our subsidiary, Kaldair Limited, who had planned to exploit the technology, and which had allowed competing technology to be improved. The delays had also caused an increase in costs, and economic failure was to be anticipated. The delays were due to the closure of operations at the refinery originally chosen as the demonstration site, and a prolonged shutdown of the sulphur recovery unit at the second site. No useful results have therefore been obtained.
1. Innovative technology :
Waste gas streams containing small quantities of toxic, odorous or other combustible components are of increasing concern environmentally. An example is the tail gas from Claus process sulphur recovery units, which may contain up to 1 to 2% of hydrogen sulphide.
This incineration system is designed to minimise the support fuel needed to destroy low calorific value streams of this type, through the following features :
* Recuperative heat recovery, by which the tail gas is preheated by heat exchange with the incinerator exhaust gases,
* Reduction in the excess air and temperatures needed for combustion, by the use of a forced-draught swirl combustor giving efficient mixing.
2. The context in which the technology is operating :
The incineration system was installed in parallel with an existing natural-draught incinerator on the sulphur recovery unit at BP Oil's Grangemouth Refinery in Scotland. The sulphur recovery unit converts hydrogen sulphide, separated from refinery streams, to elemental sulphur.
It uses the Claus process, in which the hydrogen sulphide is partly oxidised to sulphur dioxide, which is then reacted with the remaining hydrogen sulphide to give sulphur and water vapour. The tail gas consists primarily of nitrogen and water vapour, but contains low levels of unreacted hydrogen sulphide which must be oxidised in a tail gas incinerator before discharge to the atmosphere. The Claus process is widely used at oil refineries and natural gas processing plants.
3. Economic aspects of the technology :
The payback period of 2.2 years was based on an estimated saving of support fuel in comparison with the existing natural draught incinerator, and was calculated from the total cost of the new incinerator. A shorter payback would be estimated for a completely new installation based on the differential cost between the present design and a natural draught unit, the differences being due to the cost of the recuperator, the air blower and more complex controls.
4. Monitoring :
Fuel consumption, flow rates and temperatures were to have been logged over a 6-month period.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
EC24 9BU London
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.