Objective
TO IMPROVE KNOWLEDGE OF THE REACTIONS THAT TAKE PLACE DURING THERMAL TREATMENT OF HEAVY PETROLEUM CUTS WITH A VIEW TO ENHANCING THE STABILITY OF PRODUCTS
Extensive experimental work was carried out on 4 crudes, made up of 11 pilot plant runs and detailed inspections of all the products from both straight run and visbreaking runs.
On the basis of the experimental data obtained, some general considerations about the visbreaking process have been drawn and some correlations between feedstock features, process operating temperature, kinetic parameters and stability characteristics of the visbroken residues have been developed.
All the products from both straight and visbreaking runs were thoroughly inspected and the relevant characteristics carefully examined.
The total aromatic concentration and the content in sulphur and nitrogen compounds in the petroleum fractions increased with increasing boiling point and usually were higher in the visbreaking products than in the corresponding straight run ones. The visbreaking gasolines exhibited higher density, higher bromine number, higher maleyc anhydride value (MAV) and sulphur content than the corresponding straight run fractions.
The visbreaking gasoils exhibited higher density, aromatic content, sulphur content, nitrogen content bromine number and maleyc anhydride value, than the corresponding straight run fractions. Moreover, they were also unstable as they did not meet the stability specifications (2 mg per 100 cc of potential insoluble matter).
In comparison with the straight run corresponding fractions the visbreaking vacuum gas oils (VGO) exhibited a higher content in aromatic and polar compounds; furthermore, within the aromatic group, there was a shift from monocyclic to polycyclic compounds and within the saturates there was a shift from alkanes to polycyclic naphthenes. As a consequence they showed a higher density and lower K factor (higher aromatic content).
The visbroken atmospheric and vacuum residues exhibited higher density, generally higher asphaltene content and viscosity, higher nitrogen and metal content than the corresponding straight run factio ns.
TRADITIONAL TREATMENTS OF HEAVY RESIDUES SUCH AS COKING, THERMAL CRACKING AND VISBREAKING, RESULT IN GAS OILS AND VACUUM DISTILLATES OF MARKED INSTABILITY, AS IS SHOWN, FOR EXAMPLE, BY THE FORMATION OF INSOLUBLES IN THE FORMER AND BY VISCOSITY CHANGE AND PRECIPITATION OF ASPHALTENES IN THE LATTER. IN COMMERCIAL PLANTS, REDUCING THE SEVERITY AND USING SUITABLE SOLVENTS ARE THE COMMONEST WAYS OF MINIMIZING THESE PHENOMENA. IT IS INTENTED TO GAIN A BETTER INSIGHT INTO THE UNDERLYING REACTIONS AND DEVICE NEW MEANS OF MANAGING THEM THROUGH A COLLABORATIVE RESEARCH PROGRAMME INVOLVING SEPARATE CONTRACTS WITH AGIP PETROLI, SELM AND ERG SPA (SEE EN3C004600-I (A) AND EN3C004700 (A)). AGIP PETROLI'S CONTRIBUTION WILL CONCERN THE FOLLOWING POINTS:
- DEVELOPMENT OF ANALYSIS METHODS: BESIDES CONVENTIONAL ANALYTICAL TECHNIQUES, GEL-PERMEATION, NMR AND TGA WILL BE USED. COMPARISON OF THE RESULTS OBTAINED BY THE COLLABORATING CONTRACTORS, TOGETHER WITH STANDARDIZATION OF METHODS, WILL MAKE FOR SAFE USE OF THE ANALYTICAL DATA.
- PILOT PLANT VISBREAKING RUNS WILL BE PERFORMED AT 3 OR MORE TEMPERATURES IN THE RANGE 460-500 CELSIUS DEGREES ON ATMOSPHERIC AND VACUUM DISTILLATION RESIDUES OBTAINED FROM 4 TYPICAL CRUDES. EACH CRUDE WILL BE SEPARATED INTO PSEUDOCOMPONENTS ACCORDING TO THE BOILING POINT. EVERY POSSIBLE ANALYTICAL CHARACTERIZATION WILL BE PERFORMED ON THEM, AS WELL AS ON THE CORRESPONDING ONES FROM VISBREAKING PRODUCTS. THE RESULTS OF THIS COMPARISON AND THOSE CONCERNING THE STABILITY BEHAVIOUR OF ATMOSPHERIC GO AND VACUUM GO BEFORE AND AFTER REACTION SHOULD SERVE TO SHED LIGHT ON THE ORIGIN OF PRODUCT INSTABILITY.
- A KINETIC MODEL WILL POSSIBLY BE CONSTRUCTED FOR THE PURPOSE OF FORECASTING THE BEHAVIOUR OF A FEEDSTOCK AS A FUNCTION OF ITS COMPOSITION AND OF VISBREAKING SEVERITY.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- engineering and technology environmental engineering energy and fuels liquid fuels
- engineering and technology environmental engineering energy and fuels fossil energy petroleum
- engineering and technology chemical engineering separation technologies distillation
- natural sciences chemical sciences inorganic chemistry halogens
You need to log in or register to use this function
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Data not available
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Data not available
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Coordinator
20097 San Donato Milanese
Italy
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.