Objetivo
TO IMPROVE KNOWLEDGE OF THE REACTIONS THAT TAKE PLACE DURING THERMAL TREATMENT OF HEAVY PETROLEUM CUTS WITH A VIEW TO ENHANCING THE STABILITY OF PRODUCTS
Extensive experimental work was carried out on 4 crudes, made up of 11 pilot plant runs and detailed inspections of all the products from both straight run and visbreaking runs.
On the basis of the experimental data obtained, some general considerations about the visbreaking process have been drawn and some correlations between feedstock features, process operating temperature, kinetic parameters and stability characteristics of the visbroken residues have been developed.
All the products from both straight and visbreaking runs were thoroughly inspected and the relevant characteristics carefully examined.
The total aromatic concentration and the content in sulphur and nitrogen compounds in the petroleum fractions increased with increasing boiling point and usually were higher in the visbreaking products than in the corresponding straight run ones. The visbreaking gasolines exhibited higher density, higher bromine number, higher maleyc anhydride value (MAV) and sulphur content than the corresponding straight run fractions.
The visbreaking gasoils exhibited higher density, aromatic content, sulphur content, nitrogen content bromine number and maleyc anhydride value, than the corresponding straight run fractions. Moreover, they were also unstable as they did not meet the stability specifications (2 mg per 100 cc of potential insoluble matter).
In comparison with the straight run corresponding fractions the visbreaking vacuum gas oils (VGO) exhibited a higher content in aromatic and polar compounds; furthermore, within the aromatic group, there was a shift from monocyclic to polycyclic compounds and within the saturates there was a shift from alkanes to polycyclic naphthenes. As a consequence they showed a higher density and lower K factor (higher aromatic content).
The visbroken atmospheric and vacuum residues exhibited higher density, generally higher asphaltene content and viscosity, higher nitrogen and metal content than the corresponding straight run factio ns.
TRADITIONAL TREATMENTS OF HEAVY RESIDUES SUCH AS COKING, THERMAL CRACKING AND VISBREAKING, RESULT IN GAS OILS AND VACUUM DISTILLATES OF MARKED INSTABILITY, AS IS SHOWN, FOR EXAMPLE, BY THE FORMATION OF INSOLUBLES IN THE FORMER AND BY VISCOSITY CHANGE AND PRECIPITATION OF ASPHALTENES IN THE LATTER. IN COMMERCIAL PLANTS, REDUCING THE SEVERITY AND USING SUITABLE SOLVENTS ARE THE COMMONEST WAYS OF MINIMIZING THESE PHENOMENA. IT IS INTENTED TO GAIN A BETTER INSIGHT INTO THE UNDERLYING REACTIONS AND DEVICE NEW MEANS OF MANAGING THEM THROUGH A COLLABORATIVE RESEARCH PROGRAMME INVOLVING SEPARATE CONTRACTS WITH AGIP PETROLI, SELM AND ERG SPA (SEE EN3C004600-I (A) AND EN3C004700 (A)). AGIP PETROLI'S CONTRIBUTION WILL CONCERN THE FOLLOWING POINTS:
- DEVELOPMENT OF ANALYSIS METHODS: BESIDES CONVENTIONAL ANALYTICAL TECHNIQUES, GEL-PERMEATION, NMR AND TGA WILL BE USED. COMPARISON OF THE RESULTS OBTAINED BY THE COLLABORATING CONTRACTORS, TOGETHER WITH STANDARDIZATION OF METHODS, WILL MAKE FOR SAFE USE OF THE ANALYTICAL DATA.
- PILOT PLANT VISBREAKING RUNS WILL BE PERFORMED AT 3 OR MORE TEMPERATURES IN THE RANGE 460-500 CELSIUS DEGREES ON ATMOSPHERIC AND VACUUM DISTILLATION RESIDUES OBTAINED FROM 4 TYPICAL CRUDES. EACH CRUDE WILL BE SEPARATED INTO PSEUDOCOMPONENTS ACCORDING TO THE BOILING POINT. EVERY POSSIBLE ANALYTICAL CHARACTERIZATION WILL BE PERFORMED ON THEM, AS WELL AS ON THE CORRESPONDING ONES FROM VISBREAKING PRODUCTS. THE RESULTS OF THIS COMPARISON AND THOSE CONCERNING THE STABILITY BEHAVIOUR OF ATMOSPHERIC GO AND VACUUM GO BEFORE AND AFTER REACTION SHOULD SERVE TO SHED LIGHT ON THE ORIGIN OF PRODUCT INSTABILITY.
- A KINETIC MODEL WILL POSSIBLY BE CONSTRUCTED FOR THE PURPOSE OF FORECASTING THE BEHAVIOUR OF A FEEDSTOCK AS A FUNCTION OF ITS COMPOSITION AND OF VISBREAKING SEVERITY.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental energía y combustibles combustibles líquidos
- ingeniería y tecnología ingeniería ambiental energía y combustibles energía fósil petróleo
- ingeniería y tecnología ingeniería química tecnologías de separación destilación
- ciencias naturales ciencias químicas química inorgánica halógenos
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
20097 San Donato Milanese
Italia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.