Objetivo
THE OBJECTIVE IS THE DEVELOPMENT OF AN AUTOMATIC, EFFICIENT, NON-POLLUTING, VARIABLE OUTPUT, CENTRAL-HEATING BOILER SPECIFICALLY FOR PEAT AND BIOMASS PELLETS.
The ultimate objective of the contractors is the establishment of the PELLET FUEL SYSTEM, thereby enabling peat and biomass (straw or wood) pellets to replace distillate oil as the main central heating fuel. Although these fuels have been significantly less expensive than distillate oil on an energy basis for a considerable time they have never seriously challenged oil for 3 reasons. Firstly oil fired central heating boilers operate at far higher efficiencies than solid fuel competitors, secondly they are highly controllable in that the user can control both the temperature of the heated space and the periods during which they are heated. Finally oil is cleaner and more convenient than solid fuel, it leaves no ash and, being a liquid, it can be delivered through pipes and stored in tanks, etc.
The 2 immediate objectives are the development of an automatic, highly controllable, clean and convenient pellet fired central heating boiler which operates at high efficiency over a wide range of output, and to devise the microprocessor based control system for this boiler. The plan is to package this fully automatic pellet boiler together with existing pellet handling devices thereby establishing the PELLET FUEL SYSTEM, through which peat and biomass pellets will provide the controllable, convenient, and nonpolluting central heating at a cost well below that of oil fired boilers.
Regarding the environmental aspects, a transfer to these fuels will bring about a reduction in acid-rain and minimises the unnecessary production of carbon dioxide. These fuels take in carbon dioxide through the respiratory process during their growth.
With respect to maintenance and reliability consideration was given to achieving high efficiency without employing a heat exchanger which could require weekly cleaning, similarly clean methods of ash disposal were pursued, and great effort went into devising a boiler control system which would not require an input from a circulating water flo wmeter. These can be expensive and unreliable.
The eventual outcome was a combustion-chamber, without a heat exchanger, which operated at an efficiency of approximately 60% over an output range from 20% to 100%. This design was arrived at after 6 designs had been tested, and it has not yet been optimised. A control system has also been devised which adjusts the boiler output, while operating in either the Air Mode or the Water Mode. In the former mode it employs a room temperature error signal, and in the latter mode, it employs water temperature error signals only. The boiler provides the user with a user friendly menu driven program (the boiler can be programmed to operate at specified outputs for specified periods).
THIS BOILER TOGETHER WITH EXISTING PELLET BULK-HANDLING TECHNOLOGY WILL CONSTITUTE A PACKAGE WHICH WILL PUT PEAT AND BIOMASS IN A POSITION WHERE IT WILL PROVIDE COMFORT-HEAT AS CONVENIENTLY AS OIL DOES AT PRESENT, AT A GREATLY REDUCED COST.
IT IS THE ULTIMATE INTENTION TO DEVELOP AND ASSEMBLE SUCH A PELLET-FUEL PACKAGE. THE OBJECTIVE OF THIS RESEARCH PROJECT IS THE OPTIMISATION OF THE DESIGN OF THE COMBUSTION ZONE OF THE PROPOSED BOILER, THROUGH A THOROUGH INVESTIGATION INTO THE FACTORS WHICH INFLUENCE THE COMBUSTION OF, AND THE HEAT-TRANSFER FROM, PEAT AND BIOMASS PELLETS, AT DIFFERENT OUTPUTS.
THE RESULTS SHOULD PROVIDE THE SPECIFIC INFORMATION ON THE COMBUSTION OF PEAT AND BIOMASS PELLETS, REQUIRED FOR THE DESIGN OF AN AUTOMATIC, EFFICIENT, VARIABLE-OUTPUT, PELLET BOILER.
THE PROPOSED OBJECTIVE IS THE ACHIEVEMENT OF AN EFFICIENCY ABOVE 65% (AND HOPEFULLY REACHING 80%) OVER AN OPERATING RANGE FROM MAXIMUM OUTPUT, DOWN TO 10% OF MAXIMUM OUTPUT, I.E. SLUMBERING. THE BOILER WILL THEN HAVE THE CAPABILITY OF PROVIDING BOTH CENTRAL-HEATING DURING THE WINTER MONTHS AND ECONOMIC DOMESTIC HOT WATER DURING THE SUMMER MONTHS WITHOUT IT BEING NECESSARY TO FREQUENTLY EMPLOY THE AUTOMATIC, START-UP ELECTRIC ELEMENT. THIS ELEMENT IS CONSIDERED TO BE A DELICATE COMPONENT WHICH COULD LEAD TO UNRELIABILITY. PEAT PELLETS IN PARTICULAR HAVE GOOD SLUMBERING CHARACTERISTICS.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sistemas de automatización y control
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica hardware informático procesador informático
- ingeniería y tecnología ingeniería ambiental energía y combustibles
- ciencias agrícolas agricultura, silvicultura y pesca silvicultura
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
4 DUBLIN
Irlanda
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.