Objectif
Problems to be solved
Toxic Heavy Metals (THM) are well known pollutants from both natural or anthropogenic sources. Their deposits in solid or liquid solutions have several ways to spread out (including both physical and chemical transformations) and thus to get into the trofic chain. The current "in site" THM detection systems are generally limited to spectrophotometer chemical test kits.
These offer the convenience of field analysis but have several important limitations:
· Speciation is not achieved, only total content is determined
· Chemical and physical interferences to measured signal can be dramatic
· Still require a high degree of user competence. Thus, data are poor to determine trends in pollution and to contribute to a proper risk assessment. A solution to this problem will directly contribute to the EU policy for environmental information and protection of ground waters and soils (EU council inter-institutional dossier 97/0067 (SYN)
Scientific objectives and approach
The present project is focused to throw light into this problem by identifying the contamination trends of these pollutants (including chemical speciation and metal mobility factors) as well as to determine the efficiency of the remediation processes that are applied to such a contaminated sites. To accomplish for these objectives, the research activities have been planned as follows. The project will develop and validate novel selective and robust sensing devices, including chemical sensors and biosensors and biomimetic systems for on-line operation and real time measurements of THM (Toxic Heavy Metals) present in contaminated soils, groundwater and surface waters.
This general contribution will be accomplished by the specific investigations:
· Elaboration and validation of electrochemical biosensors/immunosensors and screen-printed electrodes for analysis of THM in contaminated soil, surface waters and groundwaters
· Determination of THM chemical speciation and its trends of contamination.
· Designing and construction of a portable detection system for THM determination· Integration of the data generated by the new devices into a decision taking scheme based on GIS (Geographical Information System) to provide a more accurate and inexpensive risk assessment.
Expected impacts
The developed detection systems will be validated in laboratory and field trails and then actively used for the monitoring of pollution levels in contaminated European sites and landfills and for controlling the efficiency of remediation activities. The GIS technology will enable an efficient use of the sensing systems. It will take benefit of the new type of data, for producing a more accurate and flexible evaluation of risks, targeted to the case of large sites contaminated with heavy metals. The project is also addressed to European regulation by determining monitoring procedures that will asses decisions for cleaning up toxic heavy metals contaminated site. Moreover, the developed procedures will allow for the obtaining of data about the state of groundwater and soils (in terms of metal content) that can be included in already existing databases such as those managed by the European Environmental Agency. The problems related to industrial activities (i.e. metal finishing industry, production of fertilisers, urban sludge treatment, mining activity and consequences of mining tailing spills) are currently under strong consideration due not only to limitations on cost effective and technological competent processes but also to the lack of appropriate decision making procedures. The final goal is to introduce the developed monitoring systems on markets, in which present industrial products have not penetrated because they are too expensive and/or require excessive maintenance or calibration or because their size is simply too large.
Toxic Heavy Metals (THM) are well known pollutants from both natural or antropogenic sources. Their deposits in solid or liquid solutions have several ways to spread out (including both physical and chemical transformations) and thus to get into the trofic chain. The current "in situ" THM detection systems are generally limited to spectrophotometric chemical test kits. These offer the convenience of field analysis but have several important limitations:
Speciation is not achieved, only total content is determined
Chemical and physical interferences to measured signal can be dramatic
Still require a high degree of user competence
Thus, data are poor to determine trends in pollution and to contribute to a proper risk assessment. A solution to this problem will directly contribute to the EU policy for environmental information and protection of ground waters and soils (EU council inter-institutional dossier 97/0067 (SYN))
Expected impacts
The developed detection systems will be validated in laboratory and field trails and then actively used for the monitoring of pollution levels in contaminated European sites and landfills and for controlling the efficiency of remediation activities. The GIS technology will enable an efficient use of the sensing systems. It will take benefit of the new type of data, for producing a more accurate and flexible evaluation of risks, targeted to the case of large sites contaminated with heavy metals. The project is also addressed to European regulation by determining monitoring procedures that will asses decisions for cleaning up toxic heavy metals contaminated site. Moreover, the developed procedures will allow for the obtainment of data about the state of ground waters and soils (in terms of metal content) that can be included in already existing databases such as those managed by the European Environmental Agency.
The problems related to industrial activities (i.e. metal finishing industry, production of fertilisers, urban sludge treatment, mining activity and consequences of mining tailing spills) are currently under strong consideration due not only to limitations on cost effective and technological competent processes but also to the lack of appropriate decision making procedures. The final goal is to introduce the developed monitoring systems on markets, in which present industrial products have not penetrated because they are too expensive and/or require excessive maintenance or calibration or because their size is simply too large.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs biocapteurs
- sciences naturelles informatique et science de l'information bases de données
- sciences naturelles sciences de la Terre et sciences connexes de l'environnement géographie physique cartographie systèmes d’information géographique
- sciences naturelles sciences de la Terre et sciences connexes de l'environnement sciences de l'environnement pollution
- ingénierie et technologie génie de l'environnement gestion des déchets procédés de traitement des déchets
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
08193 BELLATERRA
Espagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.