Objetivo
The PIVER pilot vitrification facility at Marcoule was operated between 1969 and 1980, first using a batch process to vitrify Gas-Cooled Reactor fuel element reprocessing waste, and then to develop a continuous process to vitrify Fast Breeder Reactor (FBR) fuel reprocessing waste. A total of 12 t of glass was treated. It was then decided to remove the equipment and clean up the cell in order to install new equipment for continuous vitrification of waste generated by reprocessing FBR fuel (PIVER II).
PIVER is the first vitrification cell for fission product solutions to be decommissioned. Under a previous contract (FI1D0057), all process equipment items of the main cell were removed, followed by preliminary decontamination carried out in remote operation. So, the internal radiation level was reduced from several Gy/h to less than 10 mGy/h. The remaining radioactivity inventory is estimated at about 1.1E13 Bq (300 Ci). At this level, access to the cell is now possible for durations not exceeding about one minute; the cell remains highly contaminated and requires the use of ventilated protective clothing under severe working conditions.
The work to be carried out under this contract is aimed at continuing decontamination and dismantling work enabling further dismantling of in-cell equipment with hands-on techniques and finally to reach a radiation level allowing the installation of new equipment with standard working conditions for controlled zones. In particular, the generation of specific data on costs, working hours and job doses as well as on the amount of created secondary waste is considered as an important objective of this project.
The contractual work will result in assessed decontamination procedures for highly contaminated cells.
PIVER is the first vitrification cell for fission product solutions to be decommissioned. Under a previous contract, all process equipment items of the main cell were removed, followed by preliminary decontamination carried out in remote operations.
The work to be carried out under this contract is aimed at continuing decontamination and dismantling work enabling further dismantling of in cell equipment with hands on techniques and finally to reach a radiation level allowing the installation of new equipment with standard working conditions for controlled zones.
Dismantling and decontamination of the PIVER cell reduced the in cell radiation level to 0.1 mGy/h. Research and development work on enhanced decontamination processes was carried out. 4 mature processes (electrolytic, shot peening, cryogenic and gel) were tested under actual, representative hostile conditions to assess their advantages, drawbacks and effectiveness. The final decontamination operations were carried out on only a portion of the cell wall, and did not significantly affect the overall ambient radiation level in the cell. The dismantling and decontamination operations in the PIVER cell have been successfully terminated and quantitatively assessed.
WORK PROGRAMME
1. Dismantling of the telemanipulators in the PIVER cell including 2 MT200 master-slave manipulators, a robot manipulator (CAROLINE) and a pantograph manipulator (ANTOINE).
2. Further decontamination of the PIVER cell with various decontamination techniques (chemicals using liquids, foams and gels, electropolishing, and cryogenics), accompanied by radiological measurements.
2.1. First stage decontamination by short time in-cell work, aimed at strongly reducing the dose rates.
2.2. Second stage decontamination by long time in-cell operators' work.
2.3. Final decontamination aimed at obtaining standard working conditions for controlled areas in the cell (dose rate < 0.1 mGy/h).
3. Dismantling of the remaining pipes not needed for the future use of the cells.
4. Identification of the remaining cell internals by photogrammetry for facilitating design work for the reuse of the cell.
5. Generation of specific data on costs, radioactive job doses, working time and secondary waste arisings, derived from the execution of items 1 to 3.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias físicas física nuclear fisión nuclear
- ingeniería y tecnología ingeniería de materiales textiles
- ingeniería y tecnología ingeniería de materiales sólidos amorfos
- ingeniería y tecnología ingeniería ambiental energía y combustibles
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
30205 Bagnols-sur-Cèze
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.