Objectif
This project aims at improving underwater thermal cutting techniques and their remote control. The main objectives are to cut greater thicknesses and improve the safety of operation, eg, assess harmful by-products, protect workers, assist the operator during operations.
So far, underwater thermal cutting of steel has been achieved up to 70 mm thickness. This project has the objective of achieving cutting up to 200 mm. Sensors and associated systems studied in laboratory will be applied in a semi-industrial installation.
The work involves an experimental investigation in the laboratory of each contractor followed by real-case applications under non-radioactive and radioactive conditions in the former Pegase reactor in Cadarache.
The project is a follow-up of work performed in the 1984-88 EC programme (contracts FI1D0037, 0007 and 0039).
This project aims at improving underwater thermal cutting techniques and their remote control. The main objectives are to cut greater thickness and improve the safety of operation, eg assess harmful by products, protect workers, assist the opertor during operation.
The facilities such as the moving device and test tank have been studied, realized and installed in accordance with the requirements necessary to cut great thicknesses. The modification of the current nuclearized torch is being made. A 1000A torch and a cooling system have been ordered. The problem of supplying the torch with high voltage and current was analyzed. Tests on the plasma torch plasma saw and the cutting process have been made in order to qualify working parameters. Then different material thicknesses were cut with a consumable electrode tool using stainless steel wire. The driving device for the movement of the plasma saw was completed and tested. As regards the control system for the given application, the inductive sensor was defined to satisfy:
accuracy;
ability for process control;
resistance to water and dirt;
small dimensions;
shielding against electrical and mechanical influences;
functions for stainless steel materials.
The development of a hole and edge detection algorithm and the specification for the microprocessor control unit have been made. Software modules have been specified and partly implemented. Research has continued to find samples for radioactive sample testing.
WORK PROGRAMME
1. Preliminary tasks (CEA-Cad)
1.1. Detailed requirements and objectives of the project
1.2. List of parameters and ranges to be studied
1.3. Specifications of sub-systems
2. Development of the plasma torch and adaptation of the moving device (CEA-Cad)
2.1. Improvement of the performances of the plasma torch
2.2. Adaptation of the moving device
2.3. Integration of the sensors into the torch handling system
2.4. Cutting tests with measurement of effluents
3. Development of other tools (UH-IW)
3.1. Optimization of cutting parameters of plasma saw and consumable electrode
3.2. Control systems usable with the manipulator of CEA-Cad
3.3. Cutting tests with measurement of effluents
4. Development of control systems for sensor-controlled piloting of the handling system for the tools and the process parameters (RWTHA)
4.1. Improvement and application of inductive sensors
4.2. Process control and piloting of the tool handling system
4.3. Interfacing between the sensor system and the handling control system
4.4. Function testing in the laboratory
5. Preparation of radioactive samples taken from nuclear installations (all)
6. Final tests in Cadarache (all)
6.1. Transport of the systems to Cadarache and installation on the manipulator
6.2. Cutting tests on nonradioactive representative models
6.3. Tests with samples prepared under B.5.
7. Final evaluation and recommendations (all)
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles informatique et science de l'information logiciel
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique système d’automatisation et de contrôle
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique matériel informatique processeur informatique
- ingénierie et technologie génie mécanique ingénierie thermodynamique
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
13113 SAINT-PAUL-LEZ-DURANCE
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.