Objetivo
The aim of the project is the use of geothermal water for district heating and reclamation of drinking water. The thermal water is produced by a former gas exploration borehole which has been equipped for geothermal water production. The heat requirements are 17 MW with an annual energy amount of 48.300 MWh. The supplied areas are residential areas, recreation areas, a hospital, different schools etc..
For the geothermal heat production, about 552,000 m3 geothermal water, cooled down from 65 deg. C to 17...23 deg. C will be used. The cooling process includes primary heat exchange and cooling work by a heat pump.
By using an two step-absorption heat pump with water-lithiumbromide, the energetic results are as follows :
used geothermal energy : 24650 MWH/T
at a maximal flow rate of : 24 kg/s
and a fluid temperature of 65°C
The use of absorption heat pump is technically feasible. For an high heating efficiency, the heat pump is designed for two-step-operation. In the annual average the efficiency is about 1.70 to 1.00. In peak times the efficiency rises up to about 2.2 to 1.
Compared to conventional supply with use of fossil fuels, an amount of 28,999 MWh/y of fossil energy or 51% will be substituted by the energetical use of the thermal water.
In the next few years, the extracted thermal water (552000 m³/y) will be used as drinking water.
In future it will be used as drinking water and as thermal bathing water.
The purification of the thermal water will be done by a degassing-plant and a following two-step ozoning and filtration process.
The purified thermal water will be mixed with other drinking water in a proportion of max.66.7 to 100 and fed into the drinking water supply of Erding.
Installation of the former gas exploration borehole with a capacity of about 55 l/s thermal water and a temperature of about 65 deg. C; borehole monitoring; chemical analysis.
INNOVATIVE TECHNOLOGY
* Equipping a former gas exploration borehole for thermal water extraction at a flow rate of in the middle 12 kg/s and a temperature of 65 deg. C.
* Modelling of the hydrodynamic and thermodynamic parameters of the geothermal reservoir * Analysis and technical concepts for the water chemistry (corrosion, precipitations, additional input of protecting gas, degassing)
* very efficient energy production by cooling down the thermal fluid first in a primary heat exchange and then in a two step heat pump
* Contruction of the district heating for low temperature operation (temperature of the returning heating water of new buildings in peak times: 40 deg. C)
* Preparation of the thermal water for the use as drinking water.
CONTEXT :
Heat requirements of the district heating system :
thermal power 17.0 MW
energy amount 48,332 MWH p.y.
Water requirements of the drinking water system in
1993 2,100,000 m3 p.y.
1995 2,600,000 m3 p.y.
2000 3,500,000 m3 p.y.
2010 5,000,000 m3 p.y.
Water and heat requirements of the thermal bath (in 1997)
heat 2.9 MW/9,800 MWh p.y.
water 100,000 m3 p.y.
ECONOMIC ASPECTS :
cost of the investment 24.2 mill DM
1. borehole installation 2.0 mill DM
2. geothermal heating plant 10.9 mill DM
3. boiler for peak production 2.3 mill DM
4. district heating system 9.0 mill DM
Substituted gas and oil (p.y) 28,999 MWh
Value of substituted gas and oil 1,740,000 DM
(price of heat produced by gas and oil: 60 DM/MWh)
Yearly running costs 475,000 DM
EG contribution for the heat pump costs 1.8 mill DM
(10.9 + 2.0-1.8) mill DM
Rebate time : ------------------------- = 8.77 years
(1.74-0.475) mill DM
Costs of geothermal heat production 60 DM/MWh Costsof heat distribution 35 DM/MWh Total heat production and delivering costs 95 DM/MWh
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental procesos de tratamiento de aguas procesos de tratamiento de agua potable
- ingeniería y tecnología ingeniería mecánica ingeniería termodinámica
- ingeniería y tecnología ingeniería ambiental energía y combustibles energía fósil
- ingeniería y tecnología ingeniería ambiental energía y combustibles energía renovable energía geotérmica
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
8050 Erding
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.