Objetivo
The use of geothermal energy from a hot spring to provide 57% of the heating requirements (4,000 Mcal/h) and sanitary hot water for public facilities including a school and a hospital. The project design calls for annual energy savings of 490 TOE. Payback is estimated at 7-8 years.
The hot spring 'La Bollente' is located in the city centre and produces thermal water at 33. 5 m3/h and 70 deg. C.
The project involves the building of a 4. 65 MW central heating station and the installation of a district heating network of pre -insulated stainless steel pipes. Two plate exchangers (2 x 1. 5 MW ) will be used to recover heat from the thermal water and by using gas driven heat pumps (1. 4 MW) heat it to 80 deg. C.
Tests will be performed with a prototype exchanger immersed in the main geothermal feeder.
Optimal use of the geothermal energy is achieved by using the water directly from its source during the low load conditions which exist at various periods. When the load is higher the heat pumps are used and finally, during high load conditions, the heat generators come on line.
The plant may be replicated wherever the heating temperatures required are not too high. The utilisation of natural spring and spa water would generally be economically viable because of the relatively low investment involved. The comparatively low thermal power of this project (2300 th/h) indicates that a district heating network is efficient even if the target is small.
A saving of 500 TOE/yr is obtained.
The system supplies 13 thermal substations serving an equal number of public buildings by means of a network of stainless steel pipes . The thermal energy is produced by a power station which, in addition to traditional heat generators, is also equipped with two endothermal Otto cycle gas driven pumps which use the natural source water with a flow rate of approximately 560 l/min. During the summer and part of the winter the water is conveyed to the Baths where its ostensible curative properties are used in therapeutic programmes.
System control and optimisation is performed by a direct digital control system. This is a centralised control system which runs both the heat generating station and all the substations.
Plant specifications are : Thermal output of the plate heat exchanger - 174 kW, Geothermal water flow rate - 33. 5 m3/h, thermal jump of the geothermal water - 70-35 deg. C, Extension of the network - 3 km.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
15011 Acqui Terme Alessandria
Italia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.