Objetivo
Testing of a new type of pipes with no metallic part except at the surface and in the open hole section of the reservoir. Two twin pipes will be installed in the production well of Villeneuve St. Georges/Ile de France. At the surface one of the pipes will be fed by a high pressure pump (40 Bars) for the injection of corrosion and crystallization inhibitors, the second linked with a nitrogene reservoir at 200 Bars to control the reservoir pressure. Installation of these pipes need special stuffing box at well head. Pipes are made of two sticked polyamide-kevlar-polyurethane. This new type of coiled tubing is proposed to overcome technical difficulties met on other geothermal doublets in the Paris basin.
The project started after some static experiments were run in surface in the Cachan doublet with Tecalemit tubings in Polyamide-kevlar. The first tests were satisfactory. Some utlization of flexible Tecalemit tubing has been done in geothermal well in 1989 and 1990.
The laboratory tests began in Douai in September 1990. Traction and rupture tests confirmed previous calculations and specifications given by the manufacturer. Elongation of the tubing when submitted to traction is very large but remains in acceptable range for the project.
The friction test has been carried out inside a steel pipe, in geothermal water, for two months with a very good result.
Now, final test with the special build three pipes tubing will be run and the definite product will be manufactured.
The geothermal wells of the Paris basin are strongly attacked by corrosion.
Injection of inhibitors at the pump level has been operated for several years with interesting results. Now, it appears that the level of injection must be deeper in order to protect the production casing from the bottom.
As the various devices proposed for realeasing this injection are not completely satisfactory, the owner of the well of Villeneuve St Georges and SPEG have proposed to demonstrate the possibility of using a thermoplastic tubing in the production well. In order to make the demonstration possible, many laboratory tests must be performed before the manufacture of the tubing and of the sinker bar. The running technique has also to be carefully prepared as the time permitted for running the operation is short and as the position of the injectors down in the well has to be determined with a good accuracy.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
95101 ARGENTEUIL
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.