Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2022-12-27

CLEANING OF DAMAGED GEOTHERMAL WELLS BY HIGH PRESSURE FLUID INJECTION

Objectif

The project aim is to make reliable a new process which as given good results but with too high failure rate in dogger wells recovered when sulfides dammaged. A new jetting tool will be design and manufactured to eliminate jamming problems. Real scale experimentation would be carried out on a selected dogger doublet with monitoring of the break up and scales elimination. Conventional work over of geothermal wells uses mechanical action of rock bits, this new process being hydraulic causes less damage and allow at the end a more effective inhibitor treatment.
Innovative method to clean dammaged geothermal wells.
The new tools and procedures have been tested in full scale while cleaning the geothermal production well of Meaux Beauval 1 (GMX-5) from 17th to 22nd September 1990. This well is 2214 m deep with an average drift angle of 35 deg. No problems have been encountered and the inside calipers of the casing recorded after cleaning show that the efficiency of the new method is good and that all the scales have been removed.
The granulometric distribution of the particules (by weight and size) obtained from representative samples taken while cleaning allowed to estimate the total solid volume removed from the well. This result can be compared to the result obtained by recording the inside diameter of the casing before and after the cleaning works.
A new geometry has been designed for the jetting tool. The new design is closed to that of the stabilizers commonly used in the drilling strings with an helicoidal distribution of the nozzles. Two safety devices are placed above the tool and its indexation system :
- a circulating sub just above the jetting tool
- a disconnecting sub above the circulating sub
A new running procedure has been carried out. The casings are cleaned by sections of about 500 meters each which are completely cleaned one
after the other.
The following parameters are monitored or recorded :
- total out-flow
- turbidity
- sulfides and iron concentration
- granulometry of scaling
- inside casing diameter before and after cleaning.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

DEM - Demonstration contracts

Coordinateur

Compagnie pour le Développement de la Géothermie et des Énergies Nouvelles
Contribution de l’UE
Aucune donnée
Adresse
Avenue de Concyr
45064 Orléans
France

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée
Mon livret 0 0