Nitriding of sintered stainless steel

Project Information

Grant agreement ID: HPMF-CT-2002-01741

Project closed

Start date 1 April 2002

End date 31 March 2003

Funded under

• Programme for research, technological development and demonstration on "Improving the human research potential and the socio-economic knowledge base" (1998-2002)

Total cost € 80 556,00

EU contribution € 80 556,00

Coordinated by

UNIVERSIDAD POLITECNICA DE VALENCIA
Spain

Objective

The project concerns the investigation of nitrided layer on the sintered samples made of stainless steels. Chemical-heat treatment of the samples will be made according to the original nitriding method with activating pre-treatment via cathode sputtering. The subject of the transfer will be the knowledge and experience in this nitriding technology. This modern technology was elaborated in Institute of Materials Engineering of TUS (Patent no 181175PL) and makes it possible: - to obtain layers with the planned structure, - to shorten the treatment time, - to lower the gases consumption and - to treat materials which are usually difficult to treat in nitriding process (e.g. stainless steel). This innovative connection of these two technologies (new nitriding method and sintering powder technology) will lead to obtain the important effect: low-cost and environmental friendly production of elements with high wear resistance and good corrosion resistance which could be used among other in food, aircraft, automotive and chemical industry . Moreover the following knowledge will be exchanged between the both Institutions in the project: - experience and knowledge in the preparation and investigation of the sintered materials and in the practical using such modern research method as Kikuchy line techniques and Atomic Force Microscopy, - experience and knowledge in the preparation and investigation of the surface after nitriding and ion treatment.

Fields of science (EuroSciVoc)

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques.

• engineering and technology › mechanical engineering › vehicle engineering › aerospace engineering › aircraft
• natural sciences › physical sciences › optics › microscopy

You need to log in or register to use this function

Programme(s)

• FP5-HUMAN POTENTIAL - Programme for research, technological development and demonstration on "Improving the human research potential and the socio-economic knowledge base" (1998-2002)

Topic(s)

Data not available

Call for proposal

Data not available

Funding Scheme

RGI - Research grants (individual fellowships)

Coordinator

UNIVERSIDAD POLITECNICA DE VALENCIA

• EU contribution: No data
• Address: Camino de Vera s/n ; 46022 VALENCIA ; Spain
• Total cost: No data