Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2022-12-27

STANDARDISATION OF FRANCIS, RADIAL FLOW MICRO-TURBINES FOR MEDIUM HEADS

Objectif

To standardise low cost Francis turbines for medium heads (15 to 60 metres), flows of 0. 03 - 0. 9 m3/s and capacities up to 100 kW.
The turbines are to be designed with a special tubular pressure chamber, as a turbine housing, in place of the conventional spiral case.
The anticipated annual energy output is about 1,300,000 kWh/year and the estimated unit cost is 50 lire/kWh.
A total of 3 Radial Francis microturbines with a diameter of 315 (TRF 315) and 2 Radial Francis Microturbines with diameter 630 (TRF 630) are installed in the hydroelectric power plant.
Each unit is equipped with a hydraulic valve and is controlled by an automatic device that regulates the water flow opening and closing phases.
The asynchronous generators with automatic power factor correction with fixed capacitance batteries, are connected to the national network (20 kV) by a transformer and relative medium-voltage substation. There are also automatic safety devices to protect and ensure efficient operation of the power plant and the public network.
The technical problems that arose while developing this plant were properly solved; At the present time, the plant meets users' expectations and, from a technical viewpoint, the outcome of the project can be considered as good.
The economic success of this enterprise will also depend upon sector development : sustained demand would generate significant mass-production and would greatly contribute to lower the production costs and to make the product highly competitive.
This project entails the development of a series of standardised low cost Francis turbines for medium heads (15 to 60 metres), flows of 0. 03 - 0. 9 m3/s and capacities up to 100 kW.
The turbines will differ from conventional Francis turbines in that the usual spiral case with adjustible guide vanes will be replaced by a special tubular pressure chamber with fixed vanes. These fixed vanes will be specifically designed to direct the water radially before it enters the runner.
It is intended that by eliminating the adjustable guide vanes, the turbine will be simpler, more reliable, cheaper, and be suitable for fast installation and completely automatic operation.
The two demonstration project sites, one grid connected and the other isolated, will each comprise a turbine, gearbox, generator and control equipment.
Technical Data
Site Cuneo Salerno
Head (metres) 25 48
Flow (m3/s) 0. 075 0.57
Power output (kW) 13 83
a. (m) 0. 25 0. 4
Gearbox ratio 1300/1500 740/1500
Generator type Synchronous Asynchronous
No. of poles 4 4
Situation Grid connected Isolated operation
The contractor has previously designed a series of propeller type tubular microturbines (Kaplan) for small power plants, under demonstration project No. HY/419/84.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Données non disponibles

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

DEM - Demonstration contracts

Coordinateur

SOCIETA OFFICINE MECCANICHE SPA (SOM)
Contribution de l’UE
Aucune donnée
Adresse
VIA PRATI VECCHI 37
42025 Cavriago
Italie

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée
Mon livret 0 0