Objetivo
This project is designed to follow, and build upon, the results achieved in project be 7297. while still incomplete, certain key outcomes of the research can be stated;
At the high rates of discharge experienced in EV applications, active material utilisation is limited by acid availability rather than paste conductivity. Thus there is limited scope for improvements to specific by additives to the positive active mass.
Key factors in the improvement of cycle life of the valve-regulated (maintenance-free) lead-acid battery have been shown to be, compression of the active mass by the separator, the construction of the absorptive glass mat separator and the nature of the charge regime employed to recharge the battery after use.
It has been possible to enhance considerably, the properties of the grid alloys used (strength and corrosion resistance) by additions of tin and silver. Work elsewhere has shown that rapid charging techniques, as well radically reducing recharging times, can improve cycle life of flat plate batteries apparently by modifying active material structure. Such techniques can however result in elevated temperatures in the battery which can be detrimental to negative plate life. Also certain test regimes for EV batteries have demonstrated that the negative plate can fail under the influence of repeated and prolonged, high-rate discharge pulses. Accordingly the work in the Project will focus in three areas;
The improvement of specific energy and life of lead-acid batteries by the development of light-weight tubular designs using the high-strength, corrosion resistant alloys mentioned above. In this type of battery, the positive active material is constrained between the alloy spine and a porous fabric gauntlet, thus reducing opportunities for paste shedding on softening during cycling. Operating this type of battery under compression, in an AGM design, will help to maintain electronic conductivity within the active material, especially with the lower paste densities required for higher utilisation. Rapid charging techniques will also be tried on these designs.
The study of separator compression across the plate stack as a whole to determine the reasons for the early initial loss of capacity experienced in these designs. Several different separator designs will be studied to overcome problems of acid stratification and relaxation of compression during service.
The mechanism of the degradation of the negative plate will be studied under conditions of electric vehicle service and, following this, work will be carried out to develop improved expander additives for the maintenance of the required open structure in the negative active mass. The work is expected to result in further improvements to cycle life and specific energy of the lead-acid battery and a consequent reduction in running costs. This will in turn make the performance and COSt of an electric vehicle more attractive and hence improve their marketability. This will be done with out detriment to the current inherent good recyclability of the lead-acid battery
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias sociales geografía social y económica transporte vehículo eléctrico
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias químicas química inorgánica metales de postransición
- ingeniería y tecnología ingeniería de materiales sólidos amorfos
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
W1N 3LQ London
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.