Objetivo
- Reduction of equivalent CO2 emissions by about 9% for TDK, means about 3580 t/y.
- Production of electrical energy by using waste heat, about 5324040 KW/Y, means about 14% of present yearly consumption.
- Production of electricity as a function of energy recycling within a closed circuit.
- Increased electricity yeld of turbine/generator unit by improving nozzle- and blade-design.
- No additional energy consumption. No additional primary energy.
- Replication potential for other users of EGI systems.
- Saving of about 7856000 LUF/y on energy expenses.
Project estimation : 643 KW per hour
Average electricity generation :
October : 662 KW/H
November : 653 KW/H
December : 657 KW/H
January : 595 KW/H
February : 662 KW/H
March : 641 KW/H
April : 620 KW/H
AVERAGE : 641 KW/H
TDK Recording Media Europe SA runs a fully integrated factory for the production of Audio and Video-tapes in Bascharage, Grand-Duchy of Luxembourg. Fully integrated means that form the base film and the painting materials (mixed with solvents), all steps of the production of the final product are covered within the same site.
For environment reasons TDK is operating two exhaust gas incineration lines, combined with waste heat boilers for the generation of saturated steam. The so-called EGIs (Exhaust Gas Incinerators) are used to incinerate the solvents evaporating during the paint production, the coating and the tape drying process.
One incineration line covers the Audio production and the other one covers the Video production. Both have the same capacity : - Incinerated air-volume, loaded with evaporated solvents : 27000 Nm³/h each
- Natural gas consumption to support combustion : about 200 Nm³/h each
- Steam capacity : 8 t/h steam of 9 bar abs.
The incinerators were installed as environmental protection units. By keeping a constant incineration temperature of 780°C, emissions are kept well below the strict rates imposed by the Luxembourg authorities and the operating permission. During the last 3 to 3 1/2 years TDK has achieved to reduce energy consumption of production process. The project will implement the following equipments :
- re-ajustment of design-capacities of both waste-heat boilers to 2*4 t/h, 9 bar abs; - cutting off heat exchangers for building- heating from steam supply. Instead of this, heating water will be warmed up by two newly to install economizers located in the hot air exhausts of the two EGIs; - installation of saturated steam-turbine for a steam quantity of 7.2 t/h, 9 bar abs and a power generator for the production of three-phase current with a tension of 400 V and a capacity of 750 KWe; - supply of the so-produced electricity into the low tension network of a transformer with a capacity of 1600 KVA. Usage of the electricity produced in the coating and drying process; - installation of a vacuum condenser with an outlet pressure of 0.08 bar and an outlet steam temperature of 42°C; - installation of an atmosphere cooling tower for the cooling of the condenser mentioned; - installation of a pre-heater into the pre-flow line of heating for the warming-up of the turbine condensate to about 90°C before feeding into the condensate collector in the boiler-house; - tie-in all needed pipelines for cooling-water, steam, condensate, heating, etc.; - construction of the foundations for turbine, vacuum-condenser, generator and cooling tower; - electrical wiring for power supply to transformers; drives; etc, needed in the equipment (pumps, controllers, counters, etc.)
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental gestión de residuos procesos de tratamiento de residuos reciclaje
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información industria electrotécnica ingeniería eléctrica generación de energía eléctrica
- humanidades artes artes visuales
- ingeniería y tecnología ingeniería ambiental energía y combustibles energía fósil gas natural
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
4902 BASCHARAGE
Luxemburgo
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.