Objectif
The aim was to develop an energy-saving process and the necessary equipment for curing vacuum-pressure impregnated stators. The developed prototype of a direct heating furnace ensures low energy consumption in the curing of the stator assembly. The new solution was to provide the following improvements on the classical hardening process in a convection furnace:
A reduction of approx. 15% in the energy levels needed for each assembly during preheating/curing; a reduction of approx. 10.25% of solvent/curing agent losses or the escape of low-molecular groups from the resin, which reduces environmental pollution; a reduction of approx. 33% in the preheating period for the respective resin system; more even temperature rise in the components minimising temperature differences in the component (35%); elimination of rotating curing and achievement of a uniform curing degree, which results in lower equipment/tool costs; a reduction (50%) in the total furnace volume for the same useful volume.
The direct heating furnace has the following advantages over convection furnaces :
- A reduction of approx. 15% in the necessary energy input per component for preahting curing
- A reduction of approx. 10-25% of the solvent and curing agent losses or of the escape of low-molecular groups from the resin, which means less environmental loads and improved quality parameters
- A reduction of approx. 33% in the heating time within the limits of the respective resin system
- A 35% more even heating of the component with minimum temperature differences inside the component (quality parameters).
- The elimination of rotary curing and achievement of a uniform curing, which means lower fixture and tool costs
- A reduction of 50% in the furnace volume for the same useful volume
- The elimination of furnace waggons and the associated chargin surface.
The running operating costs are determined by the consumed energy. 75 kWh are used for the curing of one stator of shaft height 500 mm, and forthe simultaneous curing of two stators approx. 110 kWh.
In contrast to convection furnaces with their exclusively secondary energy absorption via circulating air, the newly developed direct heating furnace ensures the heating of the component primarily through heat conduction and secondarily through radiation with a temporary convective component by running a current through the windings: The unit comprises the following components :
- Power section, regulated with compensation equipment
- Furnace envelope (lid), insulated and foldable
- Universal tool component and
- Registering unit for temperature/time regulation.
The power section provides the necessary heat energy according to the programmed preheating and curing times. The universal tool component ensures an even heating of the component via radiation and a temporary convective component. As opposed to convection furnaces, the furnace envelope has no fittings for air-guiding and heating systems. Thus it has no other function than that of a heat insulator, and the useful space ofthe furnace is identical with the evaporation space which means a considerable reduction in size. The design of the furnace has been simplified so that furnace doors and furnace waggons are no longer necessary. The furnace is designed in such a way that the furnace space can simultaneously be used for charging. The furnace envelope can be halved. The test report proving adherence to curing parameters comes from the registering unit and can be called up.
The shorter preheating time and reduced convection (by an amount smaller than 10%) guarantees optimal incorporation of, for example, the curing agent into the resin system, where rotary curing of the components is not necessary, eliminating associated tool and fixture costs. This also leads to a smaller furnace room. The furnace volume is 50% smaller than that of convection furnace.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
01259 DRESDEN
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.