Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-05-07

IMPLANTATION IN A PILOT SCALE OF A NEW ORGANISATION FOR HOT DIP GALVANIZATION INDUSTRIES

Objectif

Today in Europe, a galvanisation workshop can have annual cost of waste treatment from 40 000 to 120 000 Euro depending on the size of the industry and the country. All galvanisation workshops are confronted with the problem of elimination of pickling bath chemicals. The valorisation of these baths presents the most favourable solution.

The aim of the project was the pilot scale implementation of a new process in hot dip galvanisation workshops in order to demonstrate its efficiency and technical-economical viability, according to the earlier successful results of a CRAFT project. This project looked at the environmental problems of this industry through waste minimisation and proposed a clean technology compared to the traditional solutions.

The objectives of the project were to:

- improve the pickling process, introduce new concepts such as stirring and temperature control and optimise the management of the baths.
- avoid the cross contamination of Zn and Fe in both the pickling and the etching baths.
- produce valorizable wastes with the following characteristics: a bigger concentration of the metals iron and zinc in the bath; and no contamination of iron in the bath of zinc and vice versa.

The final result of the project were an optimised process based on existing pickling procedures. Most of the existing facilities and infrastructure in the hot dip galvanisation workshops could be used and some modifications will be needed. The final process will be based mainly on methodology and good practice without interference in the organisation and in the good quality of the galvanised materials being produced.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Mots‑clés

Les mots-clés du projet tels qu’indiqués par le coordinateur du projet. À ne pas confondre avec la taxonomie EuroSciVoc (champ scientifique).

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CSC - Cost-sharing contracts

Coordinateur

ASOCIACION DE INVESTIGACION METALURGICA DEL PAIS VASCO (INASMET)
Contribution de l’UE
Aucune donnée
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (4)

Mon livret 0 0