Objectif
In the project there will be developed the scientific and technological principles for design of new class of low cost self-organizing wear resistant tool materials, e.g. materials that improve operating properties during exploitation. Among different friction joints the cutting tools are operating in extremely unfavourable conditions: high contact stresses, high dynamic and impact loads, high temperatures. So the increase of its wear resistance is an important scientific and technological problem.
The last researches (carried out by Surface Phenomena Researches Group) show, that in several tool materials the phenomenon of self-organization is observed. This phenomenon constitutes of changes of chemical and phase composition and fine structure of contact surface of tool, which influence positively on mechanical and heat conditions of contact interaction between the tool and work piece, and protect a tool surface from wear and prolong in this way a tool life.
Two new adapting tool material classes will be developed in the project:
1. basing on engineered hard coatings applied by plasma vacuum deposition technology with ion implanting gradient layers;
2. basing on deformed compound powder (DCPM) high speed steels with adds of several carbides, nitrides, and oxides;
3. combination of hard coatings and DCPM.
The main aims of this work are the following:
- Development of physico-chemical model of self-organization in cutting tools strengthened by complex coating technology;
- Development of the technology prototype of engineered coatings on base of TiC, ion nitriding, ion implantation of In that allow to reach the required self-organization effect and to increase sharply (in 5 ... 10 times) the work life of various types of tools;
- Elaboration of new surface coated polyphase powder composite materials on base of high speed steel + TiC with adds influencing on the self-organization processes: c-BN, or the ones decreasing friction coefficient (Al2O3, Mo2S). As a way of further technology development, the Al2O3 particles with special coating will be used.
In the present project the physico-chemical phenomena in wear zone will be investigated using all modern techniques of surface analysis (AES, XPS, SIMS, EELFS, SEM).
The previous results obtained by Surface Phenomena Researches Group are very promising: for several kinds of developed composite powder materials tool life was prolonged in 10 times with simultaneous metalworking intensification from 2 to 4 times.
It is expected, that these new "self-organizing" tools will have wear resistance comparable with existing ones and a cost 3 times lower.
Cooperation between EU/CCE/NIS in the Frame of the present project will provide means for innovative technology transfer and strengthening the Community's and NIS scientific and technological basis, and reduction in consumption of the strategic materials such as wolfram.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Données non disponibles
Coordinateur
90542 Eckental
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.