Objectif
MAPS will develop an interface for amputees. The project will develop and test a "sensor socket" (SES) that can be used to monitor amputee progress remotely. Rehabilitation centres and industrial companies will co-operate on the project. Rehabilitation centres will define what parameters give the most relevant information on how the patient is doing, then the industrial companies will develop sensors (and/or sensormats), connect them to a specially developed data link and incorporate these devices in a socket that acts as interface between limb and prosthesis. The socket will retrofit conventional sockets and can thus be used without changing prosthesis. The SES will finally be validated by testing it on patients and comparing the results with those obtained with conventional methods. Data transfer by telecommunication will also be tested. A validated prototype of SES will be the main deliverable from the project. Results will be presented in reports and articles in relevant magazines.
Objectives:
MAPS is to develop an interface for amputees where physical data for the stump can be gathered over a period of time in normal situations. The data will be sent using telecommunication methods to rehab doctors and/or CPO for evaluation. Another possibility is a system sending real time information. The concept is called the Sensor Socket (SES) and aims to incorporate relevant sensors into sockets that are used as the interface between stump and the prosthesis. The system includes telecommunications equipment needed for sending and receiving data from the SES remotely. The SES approach is a vehicle to assist amputees to be integrated into society and to maximise the comfort and use of their prosthesis. Another objective is to gather statistical medical information about amputees, leading to improved treatment.
Work description:
To achieve the project goals the work is divided into three main phases:
1. SES specification.
2. Design and prototyping of key parts of the SES.
3. Validation of SES measurements and procedures.
In the first phase, the functionality of SES is defined. This involves deciding which parameters are to be measured, setting references, and defining how much information is needed from the SES. This will be done by interviewing patients and through statistical analysis of patient data. The deliverable from this phase will be the design criteria for the SES.
The second phase of the project will be the actual making of the SES to meet the already defined design criteria. Deliverables from this phase will be a prototype of the SES for fitting and telecommunications equipment for data transfer Measuring techniques and sensors will de developed for use in the SES.
In the third phase, the prototypes will be tested and the results compared with data obtained using conventional methods. Validation will be based on statistical comparison of these results. The deliverable from this phase will be a tested and validated prototype of SES.
The aim is to market the SES within nine months of project conclusion. It is also expected that results will be published in relevant magazines and to the media in general.
Milestones:
There are three major milestones in the project.
1. Design criteria for the sensor socket (SES). Ten months after the start of the project, a report will be produced containing information about the parameters to be measured.
2. A prototype of the SES. This prototype will be ready after 18 months and will include the relevant sensors needed to measure the specified parameters.
3. A validated prototype of the SES will be ready in month 29 together with procedures on how to use it. Reports and articles will publicise the results of the project.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences médicales et de la santé médecine clinique physiothérapie
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique capteurs
- sciences médicales et de la santé biotechnologie médicale implant
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie de l’information télécommunication
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
110 REYKJAVIK
Islande
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.