Objetivo
The primary objective of this 18-month project is to develop a reliable, cost effective fabrication process for low power, low cost colour active matrix OLED-on-silicon micro-displays based on novel photo-patternable organic light emitting diode (p-OLED) RGB emitter materials. Due to the photo-patternability of the new p-OLED materials, conventional photolithography technique can be employed so that pixelated RGB emitters can be directly patterned. The unique feature of the p-OLED emitter system is that once it undergoes the UV cross-linking process, the polymer layer becomes insoluble and remains stable upon further processing. This is the basis for the fabrication of full colour PHOTOLEDD micro-displays without the need for colour filters as found in most conventional displays. This development will not only enable a 2D display with high brightness and efficiency to be produced, but also a novel stereoscopic 3D binocular display, the latter being based on polarised emission of the red, green and blue (RGB) light from a single p-OLED device. The novel 3D technology, which will be developed by Hull University and CRL Opto.
To ensure a successful outcome of this project, a second approach known as "Colour by Blue" will be developed by Opsys. Instead of incorporating all the RGB emitters on the same substrate as in Hull's case, Opsys has adopted a lower risk approach with the blue emitter layer on one substrate and the photoptternable photoluminescent materials with red/green emission on the other substrate. Both of the approaches described above are in principle, able to produce 2D as well as the unique stereoscopic 3D displays. The target for the 2D p-OLED materials is 15 lm/W and the target for the 3D p-OLED materials is 7 lm/W (both measured for green emission).
Work description:
The 18-month work programme is divided into two main research areas:
1) New photopatternable OLED materials with high luminescence efficiency for the respective 2D and polarised light emitting 3D devices will be developed by Opsys, Hull and DSM. Novel photopatternable orientation layers based on liquid crystalline polymers will also be made as part of the polarised p-OLED material system for the stereoscopic 3D device. Evaluation of these new material systems will be based on single pixel p-OLED test devices (both ITO glass substrates and silicon backplane substrates). Ample quantities of the optimised materials will be made for subsequent fabrication of the PHOTOLEDD devices.
2) Design and optimisation of PHOTOLEDD device structures on silicon backplane will be developed by Opsys, Hull and CRL Opto. Optimisation of top electrode structure and lifetime studies of the basic device structures will form part of this development. Together with the developed p-OLED materials, this work package will enable the fabrication of the test silicon backplane displays, thus providing the basis for further development of the full colour, high resolution PHOTOLEDD p-OLED micro-displays in a subsequent project. Analogue, digital and biased drive schemes will also be investigated to see which is the most appropriate for driving the 2D and 3D PHOTOLEDD materials. To reduce risk and cost, an existing test silicon design developed previously by CRL Opto will be made available to this project.
Finally, exploitation will be through a second 18-month project to build micro-displays based on this technology which will involve all the partners who have been chosen to establish the whole supply chain, from materials supply to end user.
Milestones:
There will be two sets of main deliverables for this project as described below:
- Month 12: Demonstrate the basic process steps for the PHOTOLEDD technology by fabrication of the first monochrome single pixel test silicon device with a transparent top electrode
- Month 18: Demonstrate the feasibility of the colour PHOTOLEDD technology by fabrication of the RGB test silicon device with luminance efficiency of >15 lm/W and >7 lm/W for the 2D and 3D p-OLED materials respectively. A successful outcome of this project will pave the way for a follow up EU project, which is to develop a high-resolution colour p-OLED micro-display based on the PHOTOLEDD technology.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería de materiales colores
- ciencias naturales ciencias químicas ciencia de polímeros
- ingeniería y tecnología ingeniería de materiales sólidos amorfos
- ciencias naturales ciencias químicas química inorgánica metaloides
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
92100 BOULOGNE BILLANCOURT
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.