Objetivo
A new base technology for extremely sensitive electromagnetic integrated sensors for the on-chip detection of analytes such as antibodies or DNA as well as for a simple multiple determination of binding forces is developed. Microbead labelled analytes are specifically captured by e.g. antibody-antigen interaction at microelectrodes. The detection of analytes is based on the strong impact of the labels on a space-dependent electrochemical current generated by microelectrodes. This current is switched from high level to low level when the microbeads are captured and is switched back when the microbeads are removed by magnetic forces. The proposed technology will have the potential to stimulate the development of a new generation of smart analytical sensor devices with extremely low detection limits and allow an alternative way to monitor relevant substances without consumption of critical additional solutions and reagents.
OBJECTIVES
The objectives of the experimental assessment project are:1) Reduce the technical risk associated with the uncertainty about the proposed measuring principle with regard to the qualitative and quantitative detection of a biochemical reaction.2) Reduce to an acceptable level the technical risk associated with the uncertainty about the IC compatible technological processes pertinent with the manufacturing of the novel sensors.
DESCRIPTION OF WORK
UOB (U.K.) is responsible for the development and manufacture of the transducers. These transducers with dimensions of only few square millimetres will bear an array of 100 platinum microelectrodes most of which can be separately addressed. Each single electrode will be surrounded by a micro-coil for the generation of controlled magnetic forces acting on the particles. Especially the electrode array material, the electrode diameter and the inter-electrode spacing are relevant properties for the transducer design and layout concept. After the concept phase the transducers will be fabricated in the semiconductor facilities of the transducer partner. ICB (Germany) is responsible for the characterisation of the transducers fabricated by the partner and the subsequent development of a sensor prototype. After the transducer characterisation the immobilisation procedure will start with a spatial deposition of dextran layers for coupling the analyte specific capture antibodies.
A system will be developed for the generation of magnetic forces. After preliminary tests with unbound magnetic microbeads measurements will start with biochemically modified microbeads and activated microelectrodes. The measuring procedure will be performed with an electrochemically active redox system. The electrical current of each array electrode is monitored while the immuno reaction between analyte molecules (antigens) and antibody modified microbeads proceeds. Subsequently, a steady increasing magnetic force is applied to the magnetic beads until the microbeads are removed from the electrodes. The ratio of high-level signals to low-level signals will be measured and the analyte concentration will be determined. Different analyte concentration will be injected into the fluid system to obtain a proof of principle of the new detection system.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sensores biosensores
- ciencias naturales ciencias biológicas genética ADN
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias físicas electromagnetismo y electrónica dispositivo semiconductor
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
48149 MUENSTER
Alemania
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.