Objetivo
Objectives
A main issue in reducing the cost of electricity produced by an SOFC is the durability of the SOFC stack. Other important aspects are the production cost per unit of cell area and the SOFC stack performance. Published data, and the partners' experience, show that the state-of-the art SOFC degradation rate is too high. It is widely believed that the degradation rate should be below 0.5 % per 1000 h. So far only Westinghouse has reported such results. However, the fabrication method used by Westinghouse is far too expensive.
The objective of the proposed three-year project is the reduction of the cost of SOFC by improving the durability without increasing the production cost or decreasing the stack performance. This will be achieved through a better understanding of the fundamentals of the degradation processes of SOFC components, and through improved fabrication techniques of starting powders and ceramic cells, aiming at appropriate (rather than maximum) purity and quality levels of active components.
Technical Approach
In order to test the SOFC-stack durability, it is necessary to undertake accelerated testing. It is believed that many of the causes for the degradation of SOFC-stack performance are due to solid state reactions. This may be either chemical reactions forming deleterious products at the interface between components, undesirable diffusion of elements from one component to another, or growth of the particles of the electrodes resulting in too coarse structures. It is also necessary to study the degradation rates at different temperatures including the operating temperature. As all the mentioned processes are thermally activated it is possible from such data sets to predict the durability with reasonable accuracy. In cases of chemical reactions they may be very sensitive to impurities. Therefore it is important to perform reactivity experiments, thermodynamic measurements and modelling.
Expected Achievements and Exploitation
The measurable objectives are:
A voltage degradation lower than 1 % per 1000 h at steady state operation with 300 mA/cm2, and at reasonable temperature in the range between 800 and 1000 °C. The internal area specific resistance should not be above 1 cm2 in a single stack element (i.e. a cell with interconnects on both sides) tested in simulated reforming gas. Fuel utilisation should be at least 80 %.
A thermal cycling resistance resulting in less than 0.5 % degradation per thermal cycle from operating to room temperature and back to operating conditions.
A further objective of bringing this Consortium together is the positive influence of co-operation and exchange of ideas which may help the European industry to strengthen its competitiveness on the future SOFC-market.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental energía y combustibles
- ciencias naturales ciencias químicas
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
ROSKILDE
Dinamarca
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.