Objectif
Objectives
In order to establish a truly sustainable thermal utilization of biomass, it is necessary not only to close the CO2 cycle, which is possible through a sustainable wood culture, but also to close the natural cycle by recycling the ash. Previous
research has shown that total recycling of wood ash leads to environmental pollution by heavy metal deposition in the
forest ecosystem. Consequently, it is necessary to separate a small side stream, as rich in heavy metals as possible, in
order to be able to utilize the maximum amount of wood ash
produced. The more effectively this heavy metal fractionation works in practice, the higher the concentration of heavy
metals in the small separated ash fraction. Following this
approach, a stable closed-cycle economy could be realized.
Technical Approach
This project focuses on the following main points:
- Standardization of methods for taking ash and fuel samples, for sample preparation (homogenization)and for the complete
detection of elements in ashes and biofuels in order to
guarantee comparable results between the project partners.
- Test runs to investigate the potential of fractionated
heavy metal separation in two straw incinerators, one wood-fired CFB-combustion, one wood-fired downdraft gasification
and one bark-fired BFB-gasification plant.
- Basic research on modeling high temperature equilibrium and the condensation/aerosol formation of easily volatile heavy
metals in flue gases of combustion/gasification plants in
order to explain the experimental results and to derive
functional correlations. This modeling will be supported by
pilot plant experiments for parameter adaptation.
- Basic laboratory research on the potential for heavy metal recovery from highly contaminated fly-ash fractions by thermal ash treatment and bio-leaching in order to recycle raw
materials and to avoid ash disposal.
- Calculation of ecological and economical impacts for the
process of thermal energy utilization and for the ecosystems concerned by stream analyses for minerals and heavy metals and by using dynamic compartment models for the impact of ash
recycling on soils, plants and the ground water.
Expected achievements and exploitation
- Standardized sampling, sample preparation and analysis of trace elements in biomass fuels and ashes will be developed. - Techniques for fractionation of heavy metals in
combustion/gasification plant as well as the possibility of
treatment of highly contaminated ash fractions by thermal
treatment or/and bio-leaching will be suggested.
- Two partners (a SME and a large enterprise) will utilize
the results of this project for the construction of new
plants.
- Development of ready-to-use models for high temperature
equilibrium calculations for heavy metals and for particle and aerosol formation in combustion /gasification processes and
for the general economic and ecological evaluation of biomass ash utilisation.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie de l'environnement gestion des déchets procédés de traitement des déchets recyclage
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie issue de la biomasse
- ingénierie et technologie biotechnologie environnementale bioremédiation biolixiviation
- ingénierie et technologie biotechnologie industrielle biomatériaux biocarburants
- sciences agricoles agriculture, sylviculture et pêche sylviculture
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
8010 Graz
Autriche
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.