Objectif
Objectives
In comparison to other renewable energy sources, thermal
utilization of biomass or waste is a cheap and technically
feasible option to reduce net CO2 emissions. Co-combustion of biomass or waste with coal in existing large-scale firing
systems offers several advantages compared with systems
exclusively fired with biomass. Use of biomass or waste,
however, may have consequences on combustion behaviour,
emissions, corrosion, and residual matter.
Based on previous experience, the objective of this project is to concentrate the research effort on the problem areas of
slagging, fouling, corrosion, ash utilization and trace
emissions by testing different co-combustion systems and to
investigate technical options to avoid these negative effects. Solution of these problems will promote a widespread use of
existing biomass resources.
Technical approach
Two different concepts will be compared with regard to
fouling, slagging, corrosion, ash utilization and trace
emissions. The first and cheapest possibility is direct co-combustion using coal and biomass as feedstock in a coal-fired boiler. Here the effects of co-combustion of different kinds of biomass on slagging, fouling, and corrosion will be
considered. The effects of co-utilization on the ash
composition have also to be evaluated and compared to a pure coal or biomass combustion system. The combustion concepts
under consideration will be fluidized bed combustion,
pulverized fuel combustion, and the slagging combustor.
A further approach is to pre-treat the biomass to remove the undesired components before combustion. One way could be a
pyrolysis/ gasification process and the use of the produced
gas in a different boiler. The gas can be used as reburn fuel for NOx reduction. A maximum gas yield being advantageous, not only pyrolysis but also gasification has to be considered. If the yield of the remaining char is too high, treatment and
combustion of the ash has to be taken into account.
Expected Achievements and Exploitation
The effects of different kinds of biomass on operation,
emissions and residuals and the economics of the different co-combustion concepts will be shown. This will make it possible to define the most suitable technique. The limits of co-combustion will be identified and measures to prevent
operational problems and to reduce environmental effects will be outlined. The results can then be transferred to industrial application; they will enable designers and operators of
combustion plant to minimize the operational and environmental impact of plant burning blends of coal and biomass. The
resulting information will allow development of new plant
designs that offer better control of boiler operation with an associated improvement in environmental performance.
Champ scientifique (EuroSciVoc)
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie issue de la biomasse
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie renouvelable
- sciences sociales économie et affaires économie
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie fossile charbon
- sciences agricoles biotechnologie agricole biomasse
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
70569 STUTTGART
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.