Objectif
Objectives
The objective of the project is the reduction of the noise emitted by a horizontal axis wind turbine by the application of serrated trailing edges. The most dominant aeroacoustic noise sources, the trailing-edge noise and the tip noise are to be tackled and reduced as far as possible. It has been proven from wind tunnel experiments within a Dutch TWIN-project that in the 2d-case a reduction of up to 6 dB(A) can be achieved by the application of sawteeth. In an EU-project on tip noise it has been shown that the noise emission strongly depends on details of the flow and, therefore, the 2d-results cannot be transferred straight away to full-scale blades. At present no theoretical predictions or experimental data are available on sawtooth trailing edge noise for 3d-flow. The STENO project wants to close this gap.
Technical Approach
Since most of the aeroacoustic noise emanates from the tip region - here representing the outer 15% of the blade - the noise-reducing means should be applied there. With a special blade tip (supplied by Aerpac) measurements will be performed in anechoic and low-speed wind tunnels at NLR, both to find the aerodynamic input parameters needed for a semi-empirical noise prediction method and to measure the actually generated noise to be compared with the predicted one. With these results, an existing 2d-model for noise emission from serrated trailing edges will be extended at TNO/TPD to and validated for the case of 3d-flow in the blade tip region. It will then be used to lay out the optimum serration geometry for the full scale UNIWEX tips. It is planned to investigate three different tips experimentally on the two-bladed 16m UNIWEX turbine of the ICA/Uni Stuttgart. Operational, structural and acoustic data will be collected, the latter by ECN applying a proven far-field method. These results will lead to a quantitative ranking of the different tips and the prediction method. After possible modifications of the tips and/or selection of differing test parameters, a second round of experiments will be conducted.
Expected Achievements and Exploitation
The project proposed will assess the noise reduction potential of sawtooth trailing edges for full-scale wind turbines and will provide a semi-empirical prediction method which could be applied to the acoustically most interesting blade tips with 3d-flow. Up to now this method is only applicable to the more inboard blade sections with practically 2d-flow. This will allow the design of quieter wind turbines - 3dB(A) less if the 2d results of the TWIN project can be achieved for the 3d-flow as well - or even cheap retrofits for existing turbines. This would allow further areas (sites) to be used for wind energy production without violating existing legal regulations for acceptable noise level limits and would increase the general acceptance of wind energy by the public.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie renouvelable énergie éolienne
- sciences naturelles mathématiques mathématiques pures géométrie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
70569 STUTTGART
Allemagne
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.