Objetivo
Project Objectives
The major aims of this project are :
development of new buffer layers alternative to those based on cadmium compounds,
design and analysis of new preparation processes as alternative to the conventional chemical bath deposition methods which can provide more efficient raw material consumption and ease large-scale implementation, characterization of the thin-film properties of the buffer layers and assessment of their performance for photovoltaic solar cells, to develop and test a whole flow-sheet in order to demonstrate a recycling approach where all chemicals used in the CBD processes can be fully recovered, and undergo as proof-of-concept for any fabrication step of a polycrystalline-thin-film solar device.
While having in mind practical applications, the goals will be concurrently addressed at aw-material consumption, environmental impact of the processes, and adaptation to industrial technologies.
Technical Approach
The lowering costs of thin-film solar cells, as factor of success of these technologies, is strongly associated to the environmental implications of their practical use and large-scale dissemination. Prevention of pollution in any production process requires to pay attention to several aspects such as, mainly:
choice of inherently safer or environmentally more benign materials; process design;
plant configuration;
human resources;
research and development.
The project will consist of four work packages to be executed by an integrated consortium which brings together a recognized European PV-company and R&D centers having expertise in all relevant fields involved: laboratory preparation of photovoltaic thin film materials, waste treatments and recycling, process engineering, and industrial implementation. These work packages address the fundamental research issues of alternative materials, new production processes, waste and chemicals treatment, and analysis of environmental impacts.
Expected achievements and exploitation
During the first six months of the project all work packages have started-up their activities. CIEMAT has developed a blocking layer, as alternative window for thin-film solar cells, by a sol-gel process with a considerable antireflecting effect, up-to a 14% of increase of light transmission through the window. Also hydroxy-sulphide thin films have been prepared by CBD up-to areas of 15x30 cm2. First assessment experiments for electrodeposition of CdTe onto these layers have been carried out by BP Solar with encouraging results. Concerning to the activities on process for a more efficient raw material consumption BP Solar has provided a new formulation for CdS-CBD, where reagent usage can be reduced by 80-90%. Recycling experiments conducted by ECP/CRSA have showed that Cd recovery from CBD process effluents until the 1 ppm limit is possible by an electrochemical method. First attempts on the utilization of extraction/stripping methods point out that Cd recovery can be possible until the range of 0.5-0.05 ppm. An experimental set-up capable of investigating the formation of CdS thin films by a continuous recirculation of the reacting solution has been designed an constructed by CPERI. Concerning the environmental impact of the processes a risk assessment of substances hazardous to human health and the environment is beeing carried out by UNN-NPAC.
Work in the coming project period will center on the same topics but will increase in depth. Particular emphasis will be placed on the development and optimization of alternative windows for thin-film solar cells. Work on recycling will focus on the separation of colloids and recovery of soluble chemicals after a CBD process. Additional emphasis will be placed on developing the continuous recirculating reactor. An experimental set-up will be designed to quantify emission levels.
Exploitation of the results is based on the utilization of compound with low environmental impacts, and the optimization of raw material and recycling of active materials, which have to help the industry in waste management with a subsequent reduction of the cost.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería ambiental gestión de residuos procesos de tratamiento de residuos reciclaje
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias físicas física de la materia condensada física de la materia blanda
- ingeniería y tecnología ingeniería de materiales recubrimiento y películas
- ciencias naturales ciencias de la tierra y ciencias ambientales conexas ciencias ambientales contaminación
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
28040 Madrid
España
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.