Objectif
With the ongoing attempt of the European Commission to reduce CO2 emission and protection of the environment, renewable energies will become more and more important. It is not unlikely that renewables will supply 20 - 50% of the global energy demand in the middle of the next century. Integration of such a large amount of renewable energy in the current grid will however cause several problems due to the irregular output. The more remote the point of connection is from the source to the low voltage grid, the greater the disturbance in the network caused by these fluctuations. Modern turbines use the flywheel effect of the rotor to avoid the sudden large step-changes in output to the local network. More efficient use of the generated power can be made if an energy storage device is used. Photovoltaic cells present an even larger problem due to the larger and more frequent fluctuations in output. A recent study showed that increasing the share of photovoltaic energy above 2.2% would present problems to the Dutch grid.
Energy storage combined with renewables would increase the "firmness" of the renewables supply and would decrease the need to connect them to a strong high voltage grid. The energy storage device could act as a power quality improvement device, importing power of whatever quality and exporting power of assured quality into the grid. Electromechanical energy storage in flywheels is a very good option for short term storage of renewable energies such as mentioned above. The benefits of flywheels over batteries are that flywheels are more compact (higher energy storage density) and they can be discharged totally on a regular duty cycle without causing damage to the system or foreshortening of the useful life. Flywheels furthermore require little maintenance offer no environmental emission as compared to batteries. The flywheel systems developed for a similar purpose in previous European projects had a maximum power up to 50 kW. With the increased power of windturbines and the large fluctuations in photovoltaic energy there will be a strong need for a high power flywheel system. Since upscaling of the smaller systems is not possible because of several technical diffculties, a new system with a high power converter controller with very good power quality has to be designed. The objective of this project is the development of a modular high power flywheel energy storage system (more than fourfold the power and triple the energy content compared to existing flywheels) to control, store and release, the renewable energy supplied to the grid (figure 2). The system will be integrated in the electricity net in cooperation with the Dutch electrical utility (NUON).
The system will have the following characteristics:
Energy storage : 15 kWh
Peak power : 1 MW
Diameter flywheel : +- 1m
Volume (incl. power electronics) : 5 m3
Overall efficiency : > 80%
Lifetime : 20 years
Cos/module : + 175 ECU
For the development of this system, the following tasks are necessary:
1 Predevelopment phase
2 Flywheel
3 Safety containment
4 Electrical machine
5 Bearings system
6 Power electronics and controller converter
7 System integration
8 Testing of lab and pilot system
9 Integration of pilot system in the grid.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie renouvelable énergie éolienne
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
6812 AR Arnhem
Pays-Bas
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.