Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-05-07

Thin Monocrystalline silicon solar Cells and Modules

Objetivo



PROJECT OBJECTIVES
The objective is to demonstrate theoretically and experimentally that in a silicon solar cell both maximum cell efficiency and lowest manufacturing costs can be achieved for wafer thicknesses between 100 and 150 Mm. This has benefit in lowering the cost of modules by having simultaneously a high module power and low manufacturing costs due to the use of thin silicon wafers and balance of system costs are also reduced.
TECHNICAL APPROACH
The project starts by modelling solar cell structures to define the ideal combination of wafer thickness, resistivity, minority carrier diffusion length and surface passivation for the highest efficiency. This modelling will be consistent with known parameters achievable from available processing techniques. Having defined the desirable solar cell structure the project is directed at realising these structures. The following sequence will be followed
WP1 Solar Cell Modelling
WP2 Preparation of substrates
WP3 Solar Cell Development
WP4 Module development and testing
Wire sawing will be used to cut the thin wafers and the PERC cell structure will form a basis for the solar cell development.
EXPECTED ACHIEVEMENTS AND EXPLOITATION
The expected outcomes are higher efficiency solar cells than present and a much lower utilisation of silicon around 50% less than that previously used. This should result in technological leadership for the participant companies giving lower production costs superior products and a significantly increased market. The specific targets are to demonstrate laboratory solar cells of 4 cm2 area with efficiencies of >18% and in solar cells made under production conditions >17 % efficiency on a 100cm2, both on wafers thinner than 150 um.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

CSC - Cost-sharing contracts

Coordinador

BP SOLAR LTD
Aportación de la UE
Sin datos
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (5)

Mi folleto 0 0