Objectif
In this project, the flash pyrolysis of biomass will be investigated in a fluidized bed bench scale plant. Wood from fast growing species as well as from cotton residues will be used as biomass feedstock. The objective is to investigate the operating conditions of the pyrolytic unit at which the yield of pyrolysis oil is maximised.
Amongst various thermochemical processes of biomass, flash pyrolysis is known to maximize liquid products yield. Flash pyrolysis is usually exerted in inert gaseous atmospheres in entrained beds or fluidized bed reactors.
In order to combust the pyrolysis derived char in a fluidized bed reactor, it is clear that char should be lead to the bottom of the bed just above the gas distributor and the fluidizing air quantity should be restricted to that amount necessary to carry out stoichiometric char combustion thus avoiding undesired oxidation of the volatile products. Since char is lighter than the sand (heat carrier), this can only be achieved if the entire char and sand mixture is recirculated resulting in guiding the entrained char in the lower oxidizing zone of the reactor.
The pyrolysis reactor to achieve such a solids recirculation consists of a circulating fluidized bed (CFB), where solids are entrained in a vertical tube (riser), while air (fluidizing gas) quantity is restricted to that necessary to carry out the derived charcombustion. After the riser, the solids are separated from the gas stream and are recycled to the combustion chamber, where fluidizing air is fed and the combustion reaction provides the heat necessary for the biomass pyrolysis.
The pyrolysis product vapours leave the reactor through the cyclone and are supplied to the downstream processing equipment (scrubber) for quenching and collection. The char is separated in the cyclone(s) and is recycled via the downcomer and the solids reinjection system (L-valve) to a bubbling bed, operating in the slugging mode, where it is combusted. The hot sand from the lower fluidized bed enters the riser section of the CFB due to the slugs, the sand being essentially the heat carrier for biomass pyrolysis process. In order to determine the hydrodynamic behaviour of the CFB reactors, a cold model was designed, constructed and operated. The design parameters were derived from mass and energy balance c alculations based on an approximate 10 kg/h biomass input, for both the cold model and the hot unit.
It is proposed to design, construct and operate a fluidized bed flash pyrolysis bench scale plant in order to determine the process parameters by which the yield of oil products is maximised. The plant will be constructed and operated in the Agricultural University of Athens, while the design and engineering will be carried out by CRES in cooperation with Free University of Brussels (B), Egemin (B) and Aston University (UK). Moreover, the technical economic assessment will be carried out in cooperation with Aston University.
The feedstock to be examined are fast growing wood species found in Greece and other southern EC countries as well as cotton stalks which are found (as an agricultural residue) in abundance in Greece, Italy and Spain.
The plant consists of a continuous feeding system, a fluidized bed and cyclones, two heat exchangers (condensers) in series, a mist eliminator, a filter, a compressor, a preheating oven, a gas flare as well as instrumentation and controls.
The subjects to be investigated in this research project are:
a) residence time of gases in the reactor;
b) particle size of the feedstock;
c) operating temperature;
d) inert gas;
e) bed material;
f) specific throughput.
The work program includes the following main phases:
1) design of the plant;
2) ordering of equipment;
3) construction of plant parts;
4) assembly of the plant;
5) commissioning;
6) operation;
7) evaluation and technical economic assessment.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques électrochimie électrolyse
- sciences naturelles sciences chimiques chimie physique thermochimie
- sciences agricoles biotechnologie agricole biomasse
- sciences agricoles agriculture, sylviculture et pêche sylviculture
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
19009 Pikermi Attiki
Grèce
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.