Objetivo
Carry out basic research on materials for components of solid oxide fuel cells (cathode, anode, electrolyte), in order to improve electrical conductivity and reduce the electrode polarization.
For electrolytes, the Bi2O3-MoO3 system was investigated. The elaboration procedure was optimized and very interesting results were obtained in terms of conductivity at relatively low temperature (650-800 C). However, the stability of these materials under very reducing conditions is still questionable.
The mechanical properties of yttria stabilized zirconia have been enhanced with additions of alumina. These additions were only slightly detrimental in terms of electrical conductivity and the use of Al2O3-doped YSZ is strongly recommended. Furthermore, other dopants (Mg and Ca) were studied with interesting results. Partially stabilized zirconias and tetragonal zirconias were also studied and the results give a wide choice for the electrolyte.
Hydrogen oxidation has been studied in details on nickel anodes and on various cermets. It has been shown that a passivation of nickel could occur at high fuel consumption. In the case of YSZ-Ni cermets, it has been demonstrated that ceria doping of YSZ could reduce the risk of Ni passivation. The study of cermet deposition procedures showed that starting with Ni powders is better than with NiO powders. The effects of titania and ceria additions to YSZ on the electrical properties of YSZ in reducing atmosphere has been studied and showed that an important electronic conductivity can be induced with titania additions.
The reduction of oxygen on various manganites and cobaltites prepared by different ways has been studied. The detrimental effect of the reaction products wit YSZ has been clearly put in evidence and explained by a study of La2Zr2O7 and SrZrO3. La2Zr2O7 has a more detrimental effect and this could be avoided either by using high Sr contents or lanthanum deficient manganites. Electrochemical studies showed that at low overpotential manganites behave as metallic electrodes, while the electrochemical properties are enhanced at higher overvoltages. Very low firing temperatures (and thus small amount of reaction products) were achieved when composite cathodes YSZ-lanthanum deficient maganites were prepared by screen printing.
SOFC have the promise to produce electricity from coal or methane with 50-60% efficiency and a 10-100 times lower pollution as compared to conventional electricity generating systems. It is believed that with the present state of the art of ceramics technology, SOFC can be produced cost effectively. (Projects JOUE-CT90-0048 and JOUE-CT90-0027 actually develop 1 kW units with existing ceramic materials). New materials however with better ion (electrolyte) or electronic conductivities (electrodes) and lower polarization, may, in the long term, lead to SOFC with a still better performance and lower cost. In this project (JOUE-CT90-0044) basic R&D is therefore carried out on the following topics.
For cathodes, the La1-xSrxMnO3 system (LSM) is investigated, extending studies to large x values (x
For anodes, cermets including Ni and titania or ceria doped zirconia or titania based oxides are tested (INPG and University of Aveiro).
Material research for electrolytes is focused on Bi2O3 and CeO2 based materials. The improvement of the mechanical and electrical properties of presently used ZrO2-8%Y2O3(YSZ) by proper dopant and/or the introduction of second dispersed phase (Al2O3) is tested (University of Pavia, CNR Messina, ICV).
Finally, different electrode/electrolyte interfaces with large area and defined morphology (porosity, grain size, thickness) are investigated with regard to stability and compatibility (INPG).
In the extension the above activities will be continued and intensified.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias físicas electromagnetismo y electrónica
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ingeniería y tecnología ingeniería ambiental energía y combustibles energía fósil carbón
- ingeniería y tecnología ingeniería de materiales cerámica
- ingeniería y tecnología ingeniería ambiental energía y combustibles pila de combustible
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
GRENOBLE
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.