Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS
Content archived on 2022-12-27

FLUIDIZED BED GASIFICATION FOR ELECTRICITY GENERATION IN A GAS STEAM COMBINED CYCLE [PRELIMINARY DESIGN]

Objective

The project covers the design, construction and operation of a fluidized bed coal gasification demonstration plant integrated with a gas-steam combined cycle for electric power generation.
This project has the following main objectives :
- verify the simultaneous and integrated operation of the two systems (gasification and combined cycle) and the capability of the plant to follow the operating conditions required by the electrical network,
- verify the reliability of the process and of the equipment used.
- verify the expected demonstration plant performance.
- collect data.L%
The economics, carried out on phase 1, led to an evaluation of plant capital cost about 300 billion italian lira; time required for detailed design and construction of the coal gasification plant is approximately three years.
The gasification system allows the utilization of different feedstocks, including low rank coals. The integration with a combined cycle results in an increased power plant efficiency and environmental compliance. The gasification plant consists of two trains, each train including coal pressurization and feeding, one gasifier with a nominal capacity of 30 t/h of coal, ash removal, particulate recovery, heat recovery, gas quench, acid gas removal.
The power generating section of the plant (combined cycle) consists of two gas turbine units, each unit including one 100 MWe gas turbine and the relevant heat recovery boiler, and of one 90 MWe steam turbine. The gasification plant is designed to convert different types of coal in a low-btu fuel gas to feed one of the two gas turbine units, the other unit being fed by natural gas or distillate oil.
The net power of the demonstration plant is about 270 MWe while the efficiency ranges between 36.7 - 37.7% depending on coal.

Fields of science (EuroSciVoc)

CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.

This project has not yet been classified with EuroSciVoc.
Be the first one to suggest relevant scientific fields and help us improve our classification service

You need to log in or register to use this function

Programme(s)

Multi-annual funding programmes that define the EU’s priorities for research and innovation.

Topic(s)

Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.

Call for proposal

Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.

Data not available

Funding Scheme

Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.

DEM - Demonstration contracts

Coordinator

Fiat TTG SpA
EU contribution
No data
Address
Via Cuneo 20
10100 Torino
Italy

See on map

Total cost

The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.

No data
My booklet 0 0