Objectif
ODS-alloys are important metal base alloys for h igh temperature applications such as advanced gas turbines, coal conversion and combined cycle plants. However, it must be protected against oxidation and/or corrosion in an aggressive atmosphrere. FeCrAlY-coatings are, among others, most promising. Composition will change by diffusion of Ni from the substrate and Al from the coating, which results in degradation of the specific coatings properties. The objectives of the research are: - the development of suitable diffusion barriers by CVD or PVD; - improvement of the adhesion of barrier and coating by ion implantation; - improvement of the coating properties by laser beam remelting; - evaluation of the promising coating-substrate materials by laboratory and pilot plant testing.
MA 6000 is an example of an oxide dispersion strengthened (ODS) alloy. Protection by a iron-chromium-aluminium-yttrium coating leads to brittle intermeltings by diffusion of Ni. A diffusion barrier would help. Atmospheric attack could be diminished by sealing of the plasma sprayed coating, which will always contain pores even by spraying under low pressure.
To extend the application of the ODS alloys to more severe conditions, the following details were established regarding coating adhesion and diffusion barrier behaviour:
sputter conditions were established for application of titanium nitride and hafnium nitride coatings on MA 6000 with very good adhesion;
good adhesion of plasma and detonation gun sprayed iron-chromium-aluminium-yttrium coating could be obtained by gradual transition of the titanium nitride and hafnium nitride coatings to metallic titanium and hafnium by decreasing the nitrogen flow during sputtering;
a further improvement of the adhesion of the sputtered layers by ion implantation could not be established;
adhesion was determined by in situ scratch testing;
controlled laser remelting could be obtained under pulsed conditions with a carbon dioxide laser;
pore and crack free surface layers could be obtained up to a depth of 0.12 mm; cracks that formed at the transition from remelted to nonmelted coating disappeared by remelting in succeeding pulses;
during remelting segregation occurred between the metallic and ceramic phase; the much lighter ceramic phase solidified on top of the metallic phase;
the remelted layer exhibited a much better wear resistance at room temperature; short erosion tests at 900 C showed a slight improvement;
long term exposure in a hot salt injected burner rig and in an atmospheric fluid bed combustor pilot plant showed an improved behaviour; presence of cracks was very detrimental.
THE PROJECT WILL BE CARRIED OUT IN 3 PHASES:
1.- THE PILOT PRODUCTION OF A LARGE NUMBER OF DIFFUSION BARRIERS OF SEVERAL TYPES ON SMALL TEST PIECES OF MA 6000. TEST PIECES WILL BE ION IMPLANTED TO MODEIFY THE STRUCTURE OF THE BASE MATERIAL FOR BETTER ADHESION. OTHER PIECES WILL BE ION IMPLANTED TO IMPROVE ADHESION BY ION BEAM MIXING.
2.- THICK CORROSION RESISTANT COATINGS OF FRCRALY WILL BE APPLIED AND COMBINED COATINGS WILL BE TESTED FOR ADHESION. THE LASER BEAM REMELTING EXPERIMENTS WILL BE FOCUSED ON PROMISING SUBSTRATE-BARRIER COATING COMBINATIONS.
3.- THE BEST COATING COMBINATIONS WILL BE SUBMITTED TO MECHANICAL AND CORROSION TESTING ON MA 6000. TENSILE TESTING AND CYCLIC TESTING WILL BE CARRIED OUT. CORROSION EXPERIMENTS ARE ENVISAGED IN CORROSION TEST RIGS AND IN A FBC TEST FACILITY.
THE APPLICABILITY OF HIGH STRENGTH MATERIALS IN AGGRESSIVE ENVIRONMENTS BY THE USE OF SUITABLE COATING TECHNIQUES IS A KEY ASPECT IN THE FURTHER DEVELOPMENT OF ADVANCED GAS TURBINES, COAL CONVERSION AND COMBINED CYCLE PLANTS, AND MAY ELIMINATE THE LIMITATIONS ENCOUNTERED IN SEVERAL OTHER PROCESS INSTALLATIONS. THIS WILL LEAD TO SUBSTANTIAL ECONOMICAL BENEFITS.
TECHNOLOGICAL BENEFITS ARE RELATED TO THE DEVELOPMENT OF SUITABLE DIFFUSION BARRIERS, WHICH CAN BE APPLIED BY WELL KNOWN TECHNIQUES AND THE IMPROVEMENT IN THE ADHESION OF THE DIFFUSION BARRIER COATINGS AND THEIR CORROSION PROPERTIES BY ION IMPLANTATION TECHNIQUES, WHICH CAN ALSO BE USED FOR JOINING CERAMICS AND METALS.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- ingénierie et technologie génie de l'environnement énergie et combustibles énergie fossile charbon
- ingénierie et technologie ingénierie des materiaux revêtement et films
- ingénierie et technologie ingénierie des materiaux céramique
- sciences naturelles sciences physiques optique physique des lasers
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
7334 DT APELDOORN
Pays-Bas
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.