Objectif
Evaluation of the mechanical behaviour at high temperature (150 - 350C ) of the Al-Cr-X (X = Fe, Mn, Mo, Ni, V) alloys rapidly solidified by centrifugal atomization and consolidated by hot extrusion. Investigation about the influence of the nature and the concentration of the X element upon the mechanical properties. Selection of one or two alloys capable of an industrial development.
Rapid solidification and consolidation by extrusion was used to produce alloys based on aluminium-chromium-X mix where X was utilised in various percentages (1% and 3% iron; 1% and 2.6% magnesium; 0.3% molybdenum; 1% and 3% nickel). New alloying elements were also added and evaluated (1% cerium, 1, 2 and 3% silicon; A 2% silicon, 1% vanadium mix).
The microstructure, hardness, tensile strength and thermal stability of the alloys were assessed and compared with a known alloy produced by Allied Signal Incorporated. Improved tensile properties were a result of the formation of stable, small precipitates (with a structure of Al13(CrX)2 formed at temperatures up to 300 C. At higher temperatures other complexes were formed which did not perform so well.
An aluminium-chromium-vanadium alloy was further strengthened by the addition of silicon. It appears that the presence of silicon favoured the nucleation of smaller Al13(CrV)2 precipitates. To overcome the problems of high temperature processing giving rise to an inferior product, the chromium and vanadium content were increased (while maintaining the ratio of Cr:V at 3:1) and the silicon content was optimized to encourage the production of Al13(CrV)2 and to restrict the production of undesirable precipitates.
The cerium alloy was found to have a high thermal stability but poor tensile strength. A similar adjustment of the chromium and cerium content and ratio should lead to improved tensile strength.
Nonimpregnated thermoplastic preforms manufactured by coweaving or comingling thermoplastic and carbon fibres processed into high quality composites. Mechanical properties were on the samel level as composites manufactured by using impregnated tapes with the exception of the longitudinal tensile strength of unidirectional laminates. For processing of complex shaped parts, the nonimpregnated preforms showed significant advantages due to the good drape properties of the textile preforms. Moreover, it was shown by means of physiochemical methods and single fibre tests that most mechanical properties of the composites investigated depend on the fibre matrix interfaces and interphases.
High performance thermoplastic based composites have the potential for improving the performance of these materials and simultaneously simplifying the manufacture of parts made out of these materials.
CONVENTIONAL ALUMINIUM ALLOYS LOSE THEIR STRENGTH ABOVE ABOUT 150 CELSIUS DEGREES. IN AIRCRAFT APPLICATIONS TITANIUM ALLOYS ARE USED FOR A HIGHER OPERATING TEMPERATURE, UP TO 450 CELSIUS DEGREES; IN THE RANGE OF OPERATING TEMPERATURE 150-350 CELSIUS DEGREES THOSE ALLOYS ARE STRUCTURALLY AN OVERDESIGN. SO THE DEVELOPMENT OF NEW ALUMINIUM ALLOYS TO BE USED IN THIS OPERATING TEMPERATURE RANGE PRESENTS SIGNIFICANT BENEFITS: SAVINGS IN FABRICATION COST AND MATERIAL, REDUCED COMPONENT WEIGHT, REDUCED CONSUMPTION OF TITANIUM.
THESE ALLOYS ARE FORESEEN FOR A WIDE RANGE OF AEROSPACE APPLICATIONS: GAS TURBINE ENGINES (LOW TEMPERATURE FAN, IMPELLER, COMPRESSOR CASES, VANS AND BLADES).
THE METHODS TO BE IMPLEMENTED ARE RAPID SOLIDIFICATION AND POWDER METALLURGY. THE APPROACH IS TO ADD ALLOYING ELEMENTS SUCH AS TRANSITION METALS OR RARE EARTH ELEMENTS WITH LOW SOLUBILITY AND LOW DIFFUSIVITY IN THE ALUMINIUM ALLOY.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie ingénierie des materiaux composites
- sciences naturelles sciences chimiques chimie inorganique métal de transition
- ingénierie et technologie génie mécanique génie automobile génie aérospatial avion
- ingénierie et technologie ingénierie des materiaux textiles
- ingénierie et technologie ingénierie des materiaux métallurgie
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
54042 Nancy
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.