Objectif
To develop new high performance permanent magnets of the type Nd-Fe-B for use in electric motors for vehicular application and for other industrial applications. Specifically, this project concentrates on the permanent magnets to be used in future hybrid electric vehicles (large magnets, high magnetic properties) and advanced car accessories (small magnets, medium magnetic properties).
The project was as follows:
the preparation and characterisation of related magnetic alloys, with improved properties and processing, compared to existing ferrite based magnets; the characterisation of the magnetic formulations through a study of the relationship between magnetic microstructure and magnetic properties; the development of magnetic components using new manufacturing systems.
The scientific and technical aims of the project included analysis of the impact of the new magnets on the features of the electric motors, definition of new concepts for the design of such motors and identification of the manufacturing processes of the permanent magnets, suitable for production at industrial level. The technology included: model calculations for determining the optimum geometry and magnetic properties of component magnets; powder metal sintering and melt spinning polymer bonding for the manufacturing process; electrochemical methods and Mossbauer spectroscopy for studying corrosion behaviour and high temperature oxidation kinetics; development of processing routes for Nd-Fe-B permanent magnets. Progress has been made in corrosion protection, thermal stability and development of cost effective production processes.
A process has been developed for manufacturing polymer bonded magnets based on the new material neodymium (15) iron (77) boron (8). The received material was crushed and melted under argon. The melt was squirted onto a fast rotating water coled roller can converted into magnetizable ribbons. The ribbons were ball milled into a fine powder and mixed with a phenobic formaldehyde resin in the volume ration 2 to 1. The mixture was moulded at 60 kg cm{-2} and cured by ultrasound with a process time of approximately 10 S. An unrestrained postcuring at 150 C for 3 hours developed the full dimensional stability. The magnets were corrosion protected by a 2 component epoxy lacquer although internal protection through additives in the resin was considered. This process for making polymer bonded magnets is advantageous compared to known processes. The loading of magnetizable material can be much higher than in traditional viscosity limited processes. The process can be fully automated and high productivity can be obtained. The process can be further optimized especially by curing under an applied magnetic field. The corrosion behaviour of neodymium iron boride type magnets with different additives has been investigated using various techniques.
THE PROJECT BRINGS TOGETHER ELECTRIC MOTOR VEHICLE AND MAGNET INDUSTRIES. THE WORK IS CARRIED OUT IN A NUMBER OF PHASES :
- THE PREPARATION, CHARACTERISATION AND EVALUATION OF RELATED MAGNETIC ALLOYS WITH IMPROVED PROPERTIES AND PROCESSING.
- THE CHARACTERISATION OF MAGNETIC COMPONENTS THROUGH A STUDY OF THE RELATIONSHIP BETWEEN MAGNET MICROSTRUCTURE AND MAGNETIC PROPERTIES.
- NEW ELECTRICAL MOTORS CONCEPTS AND MAGNETIC COMPONENTS SPECIFICATIONS, TO CHECK WITH PRACTICAL TESTING EVALUATION AND SYSTEM ECONOMICS.
- THE DEVELOPMENT OF MAGNETIC COMPONENTS ON THE BASIS OF ECONOMICAL INDUSTRIAL MANUFACTURING PROCESSES.
THE SCIENTIFIC AND TECHNICAL AIMS OF THE PROJECT COVERS THE FOLLOWING AREAS :
- ANALYSIS OF THE IMPACT OF THE PERMANENT MAGNETS, TYPE ND-FE-B, ON THE TECHNICAL AND ECONOMICAL FEATURES OF ELECTRIC MOTORS.
- DEFINITION OF NEW CONCEPTS FOR THE DESIGN OF SUCH MOTORS.
- DEFINITION OF THE MATERIAL CHARACTERISTICS OF THE PERMANENT MAGNETS.
- IDENTIFICATION OF THE MANUFACTURING PROCESSES OF THE PERMANENT MAGNETS SUITABLE FOR PRODUCTION AT THE INDUSTRIAL LEVEL.
IF THIS PROJECT IS SUCCESSFUL IT WILL HAVE A MAJOR IMPACT IN THE DESIGN OF ELECTRIC VEHICLES AND ELECTRICAL MACHINES IN EUROPE; IN PARTICULAR, FOR DUAL-MODE TROLLEY BUSES WHERE BRUSHLESS ELECTRIC MOTORS ARE TO BE INTEGRATED IN THE WHEELS; HIGH-SPEED REVERSIBLE BRUSHLESS ELECTRIC MACHINES FOR USE IN FLYWHEEL BUFFER UNITS AND IN AUXILIARY ELECTRIC DEVICES USED AS ACTIVATORS IN VEHICLE APPLICATIONS.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie mécanique ingénierie de fabrication
- sciences naturelles sciences chimiques chimie inorganique gaz noble
- sciences naturelles sciences chimiques chimie organique aldéhyde
- sciences sociales géographie sociale et économique transport véhicule électrique
- sciences naturelles sciences chimiques science des polymères
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
20128 Milano
Italie
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.