Objetivo
It is estimated that in Europe more than one million accidents occur at work annually as a result of lack of friction between shoes and floors. The costs due to days lost at work and medical treatment are valued at 1.5 billion ECU annually. Obviously there is a need to develop harmonised CEN standards for measuring slip the resistance properties of safety, protective and occupational footwear for professional use. This study was focused on bridging the gap between biomechanical test methods involving human subjects and mechanical slip test methods in order to improve the validity and reproducibility of the current draft standard for professional footwear (CEN/TC161/WG3 N22 Rev1, 1996).
The first objective was to define a test protocol based on a detailed comparison of the results of biomechanical and mechanical tests. The second objective was to check the reliability of the test protocol in a ring test and to use the findings of the ring test to propose amendments to the current draft standard as discussed in the European working group CEN/TC161/WG3.
The gap between mechanical tests and (subjective) biomechanical tests has always been large. As a result of this project this gap bas been reduced and is understood more clearly. However, the gap partly remains unbridged mainly due to the fact that in mechanical tests limited test parameters have to be chosen for practical reasons. This leads to satisfying correlations between mechanical and biomechanical results for some parts of the slipping situations, whereas other parts show poor correlations. From the interlaboratory ring test it appeared that three mechanical devices eventually succeeded in reaching the proposed test conditions. The correlation between the test results with those machines were generally acceptable (about 0.85). The correlation between results with other machines were generally poor (about 0.70). It was finally concluded that the following test conditions and parameters have to be strictly defined and met accurately: the shoe attachment and positioning, the normal force, the sliding velocity and the calculation of the dynamic coefficient of friction as a time-average. Based on definitions for these test conditions and parameters as suggested by the project partners, the European working group has already proposed a new draft standard (CEN/TC161/WG3 N23).
A series of mechanical and biomechanical tests was carried out in order to obtain detailed information about the mechanical circumstances that take place during the slip process and to find the most simplified mechanical test conditions, still leading to results that correlate well with the biomechanical test results. The relevant test conditions and parameters were used to formulate a new test protocol based on the current draft standard. Next, the project partners performed an interlaboratory ring test, using six different mechanical test devices and three different (subjective) biomechanical test methods. The new test protocol was verified by comparing and analysing the ring test results. Based on the findings in this study, the project partners proposed amendments to the current draft standard.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
2600 JA Delft
Países Bajos
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.