Objectif Measurements for the BCR Intercomparison of Electric field meters were performed during 1991-1993 over the frequency range 100 kHz to 1000 MHz and field strength range 1 V/m to 10 V/m. Seven institutes participated in this intercomparison using at least three different calibration methods. Four field sensors, both electric and magnetic, have been used. The comparison shows that for these sensors, a calibration with an uncertainty of less than 1 dB can be obtained, if certain procedures are followed. The results are applicable in the fields of EMC testing and health care (non-ionising radiation).Many existing international electromagnetic (EM) compatibility regulations that refer to a variety of different fields, ranging from legal metrology to environment and safety, impose requirements on susceptibility and electromagnetic field strength in the rf range. The reliability of the associated measurements is at present not satisfactory since the EM field sensors are not all based on the same physical principle. As a consequence, in response to the same field, the reading of two meters may differ, even when they are correctly used. Calibration laboratories have set-ups where the EM field can be calculated and when confirmed by measurement. However, at different test stations, instrument calibration is performed using non homogeneous techniques, in a variety of conditions and procedures. The present intercomparison is a first step towards the harmonisation of testing procedures. Three probes will be circulated: - a magnetic probe (RMCO 6507) - an electric isotropic probe (EMCO 7130) - an isotropic probe manufactured by Aeritalia. The measurement will be performed at linear polarization field levels of 1, 3, and 10 V/m, and .5, 1, 3, 10, 27, 100, 300, 500, 1000 MHz. Status: In progress. Champ scientifique natural sciencesphysical scienceselectromagnetism and electronicselectromagnetismengineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors Programme(s) FP2-BCR 4 - Research and development programme (EEC) in the field of applied metrology and chemical analysis (Community Bureau of Reference - BCR), 1988-1992 Thème(s) Data not available Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur Aeritalia Società Aerospaziale Italiana SpA Contribution de l’UE Aucune donnée Adresse Corso Marche 41 10146 Torino Italie Voir sur la carte Coût total Aucune donnée Participants (10) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire Area Brown Boves Suisse Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée British Aerospace plc Royaume-Uni Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée Elektronikcentralen Danemark Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée Laboratoire Central des Industries Electriques France Contribution de l’UE Aucune donnée Adresse 33 avenue du Général Leclerc 92260 Fontenay-aux-Roses Voir sur la carte Coût total Aucune donnée National Physical Laboratory (NPL) Royaume-Uni Contribution de l’UE Aucune donnée Adresse Queen's Road TW11 0LW Teddington Voir sur la carte Coût total Aucune donnée PHYSIKALISCH-TECHNISCHE BUNDESANSTALT Allemagne Contribution de l’UE Aucune donnée Adresse Bundesallee 100 BRAUNSCHWEIG Voir sur la carte Liens Site web Opens in new window Coût total Aucune donnée Philips Pays-Bas Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée Radio Frequency Technologies Ltd Irlande Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée Technical Research Centre Finlande Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée Van Swinden Laboratorium Pays-Bas Contribution de l’UE Aucune donnée Adresse Voir sur la carte Coût total Aucune donnée