Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-04-16

Magnetic measurements on electrical sheet steels by means of single sheet testers

Objetivo



The production of electric steel sheet of various qualities is not far from 1M tonnes. The prices vary considerably with the power losses in the material. For that reason an intercomparison was organised in the previous BCR programme. It had shown that the accuracy required by the commercial classifications are hardly achievable by the best laboratories. The measurements were done by the usual Espstein frame method. This method is time consuming and therefore expensive. The IEC has proposed a new method called the Single Sheet tester which is capable of accommodating sheets of 500 x 500 mm. Most producers and some metrology laboratories are already equipped for this kind of measurement. The project was designed for measurements to be done on six different materials available in sheet of two or three thicknesses.

RESULTS

The participating laboratories measured for 7 sheets of grain oriented material and 13 sheets of non-oriented materials the specific power Loss (Ps), the specific apparent power (Pa), and the relative magnetic permeability (pr).
In the case of Ps for oriented sheets, 3 laboratories agreed to within +/- 1%, 4 to within 3% and on sheets 4-6, 5 laboratories agreed to within 3%; while for non-oriented sheets, 4 laboratories agreed to within +/- 1%, except for sheet 17 which was particularly wavy and, in some cases, at higher field (1.5 T).
In the case of Pa for oriented sheets, 4 laboratories agreed to within 1% for many measurements and to within +/- 5% for the majority of the remainder, while for non-oriented sheets, 5 laboratories agreed to within +/- 1% at J=1 and 1.3 T, and within +/- 5% at different values of J with the exception of sheet 17.
All measured values of Pr have always been found to agree within +/- 1% at any value of J.

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Datos no disponibles

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

Datos no disponibles

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

CSC - Cost-sharing contracts

Coordinador

British Steel plc
Aportación de la UE
Sin datos
Dirección


Reino Unido

Ver en el mapa

Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (5)

Mi folleto 0 0