Objetivo
The measurements of the intercomparison will consist in the calibration at two primary metrological laboratories of two transfer standards (T1 and T2), to be supplied by LNE, under the following conditions :
1) standard T1, at 1 W with Ar+, and NdYag and CO2, lasers
2) standard T2, at 20 W with NdYag and CO2 lasers, at 80 W with CO2 lasers and at 300 W with CO2 lasers.
Each measurement shall be done three times of different days to check for repeatability, and is full metrological traceability shall be described.
Ámbito científico
Tema(s)
Data not availableConvocatoria de propuestas
Data not availableRégimen de financiación
CSC - Cost-sharing contractsCoordinador
LABORATOIRE NATIONAL D'ESSAIS
Aportación de la UE
Sin datos
Dirección
Rue Gaston Boissier 1
75724 PARIS
Francia
75724 PARIS
Francia
Coste total
Sin datos