Objective
The measurements of the intercomparison will consist in the calibration at two primary metrological laboratories of two transfer standards (T1 and T2), to be supplied by LNE, under the following conditions :
1) standard T1, at 1 W with Ar+, and NdYag and CO2, lasers
2) standard T2, at 20 W with NdYag and CO2 lasers, at 80 W with CO2 lasers and at 300 W with CO2 lasers.
Each measurement shall be done three times of different days to check for repeatability, and is full metrological traceability shall be described.
Fields of science
Topic(s)
Data not availableCall for proposal
Data not availableFunding Scheme
CSC - Cost-sharing contractsCoordinator
LABORATOIRE NATIONAL D'ESSAIS
EU contribution
No data
Address
Rue Gaston Boissier 1
75724 PARIS
France
75724 PARIS
France
Total cost
No data