Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-04-16

THE DETERMINATION OF YARN TWIST

Objectif



The amount of twist imparted to a yarn during the spinning process determines not only the strength, size etc of the yarn but also its appearance. Thus if the twist in nominally identi-cal yarns varies from bobbin to bobbin when the yarn is woven the eye sees the difference and the material is considered faulty. For this reason both the spinning and weaving sides of the textile industry place great emphasis on the determination of the twist in a yarn by including tolerances in contract conditions.

With regard to written standards it appears that for ring spun yarns there are adequate national and international (ISO) standards. In the case of yarns produced by the so-called open end spinning process (DE) however, there is no approved method. There is therefore a need for prestandardization work in the case of OE yarns to allow a twist measurement method acceptable to all to be agreed.

The participants will test three types of yarn by the so called twist untwist method and will then compare results.

RESULTS

ITF Mulhouse has fabricated and tested 18 batches of threads, including:
1. 3 materials (VIS/CO 67%/33%; PES/CO 67%/33%; PES 100%)
2. 2 titles (20 tex and 50 tex)
3. 3 twist coefficients (115, 125, 135).
The results of the tests indicate important differences in the measured twist values from the actual ones:
a 40-45% for VIS/CO, using the simple twist/untwist method;
b 10-15% for VIS/CO, 15-30% for PES, 20-30% for PES/CO, using the method with double counter try (NF G 07-09).
It was concluded from this preliminary work that no method is as yet sufficiently developed to be proposed as a standard and thus the intercomparison will not be carried out.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Données non disponibles

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

Données non disponibles

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

CSC - Cost-sharing contracts

Coordinateur

Deutsches Institut für Textil- und Verfahrenstechnik
Contribution de l’UE
Aucune donnée
Adresse
Körschtalstraße 26
73770 Denkendorf
Allemagne

Voir sur la carte

Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (10)

Mon livret 0 0