Objetivo
- Fabrication of 1xN lossless splitters based on a succession of planar waveguide 3dB splitters, with the signal reduction from division being compensated by an amplification stage integrated on the waveguide substrate.
- Demonstration of active integrated planar waveguide devices. The lossless splitters will be realised in an integrated planar waveguide format for broadband optical networks operating around 1550nm. The aim is to use low-cost fabrication techniques to facilitate wide-scale deployment.
- Evaluation of lossless splitters for application in IBC optical networks. The results of trials and reliability tests will be used to evaluate the devices' potential.
The proposed devices will be suitable for application in the next generation of Fibre-In-The-Loop systems.
Fabrication of 1xN lossless splitters based on a succession of planar waveguide 3 dB splitters, has been studied with the signal reduction from division being compensated by an amplification stage integrated on the waveguide substrate, and the lossless splitters realized in an integrated planar waveguide format for broadband optical networks operating around 1550 nm. The substrates were made of 2 glasses, one undoped for the fabrication of the cascaded Y-branch splitter, and one erbium doped for the amplification function. The performance of the splitter function was thus optimized without introducing excessive loss due to the presence of erbium ions. Off the shelf 1480 nm and 980 nm laser diodes were used to pump the amplifier section. These were coupled via lengths of fibre. A folded and/or spiral amplifier configuration permitted the packing of several tens of cm of waveguide length into a few square cm of substrate area. The incorporation of grating filters and/or proximity couplers to remove unused pump light or to reflect it for improved absorption was studied. Monitor photo diodes were pigtailed to optical taps on the signal channel of the splitter, and used for electronic control of the gain and stabilization against thermal effects. Target specifications have been achieved for application in an analogue community antenna television (CATV) distribution network, an in an interactive narrowband digital local access network. A cost analysis for such architectures has been carried out with the main result being that for an analogue CATV network remote pumping of the device offers lower costs than local pumping. Erbium doped ion exchanged amplifiers, based on spectroscopic evaluation of potential hosts and extensive device modelling have been developed. A glass host has been selected with reasonable spectroscopic performance and a process developed to realize waveguides in this matrix. Dual glass wafers have been fabricated. Pumping possibilities for the device have been evaluated. Continuing improvements have been achieved in experimental amplifier performance, with 8 dB of net gain already realized in a non optimised convoluted 23 cm waveguide.
Technical Approach
The substrates are being made of two glasses, one undoped for the fabrication of the cascaded Y-branch splitter, and one erbium-doped for the amplification function. The performance of the splitter function can thus be optimised without introducing excessive loss due to the presence of erbium ions.
Off-the-shelf 1480 nm and 980 nm laser diodes, designed for use with EDFAs, are used to pump the amplifier section These are coupled via lengths of fibre. The possible advantages in terms of cost, reliability and operation of using several lower-power laser diodes rather than a single higher power one is considered. A folded and/or spiral amplifier configuration permits the packing of several tens of cm of waveguide length into a few square cm of substrate area. The incorporation of grating filters and/or proximity couplers to remove unused pump light or to reflect it for improved absorption is being studied. Monitor photo diodes are pigtailed to optical taps on the signal channel of the splitter, and used for electronic control of the gain and stabilisation against thermal effects.
A testbed with a tree-and-branch PON structure, which distributes analogue CATV services at 1550nm, is being modified to incorporate the LIASON lossless splitters at the optical branch outlets. A second testbed with a double PON structure used for the distribution of CATV services as well as for interactive digital communications (mainly telephone service) will also be used as a digital environment.
Key Issues
- Extension of the optical network into customer premises.
- Exploitation of optical integration.
- Development of optical integration.
Expected Impact
The development of planar integrated lossless splitters and their evaluation in realistic testbeds will make it possible to extend the optical network to customer premises, making truly broadband communications more readily available to users. More generally, the demonstration of such devices will promote interest in integrated optics and encourage the development of more sophisticated optical chips.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería de la información telecomunicación red de telecomunicaciones red óptica
- ingeniería y tecnología ingeniería de materiales sólidos amorfos
- ciencias naturales ciencias físicas óptica física del láser
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Datos no disponibles
Coordinador
77210 AVON
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.