Objetivo
The main aim of the present research is to research and develop new, low cost alloys for the brazing of steels at temperatures lower than those used when brazing with classical bronzes. The effect of braze composition, base metal, temperature, surface preparation, fluxes and binders on joining is under investigation. Braze metal interfaces are investigated by different methods including transition electron microscopy (TEM), hot stages scanning electron microscopy (SEM), microprobe and ultrasonic (US) testing. Strength and corrosion resistance are investigated as are techniques for ribbon production (including melt spinning). Wires, powders and pastes are under investigation.
The achievements so far include:
The production of new alloys for brazing steels copper (Cu-X-Y-Z) alloys with melting range below 875 C and tensile strength of the brazed joints of the order of 500 MPa for brazing of mild and stainless steels;
copper tin phosphorous (Cu-Sn-P-Y-Z) alloys with melting range below 715 C and joint tensile strength of the order of 150 MPa for large surface brazing or steel to copper brazing;
copper tin (Cu-Sn-A-B) alloy with melting range below 850 C and joint strength of the order of 300 MPa for brazing of titanium stabilised ferretic steels.
Specific fluxes have been developed. Ultrasonic system for nondestructive examination and hot stage scanning electron microscope is in working order. Hot stage SEM, transmission electron microscope and US images of interfaces were produced.
The project has produced materials with some advantages in cost and quality over existing ones. Furthermore, these materials have a good exploitation potential. If the brazing technology becomes more universally accepted, then the research conducted will prove to be of very high value. The brazing technology is relatively new and lacks universal acceptance by industry. An effort to demonstrate its advantages, through more targeted dissemination activities, will, without doubt, help to establish it as a viable alternative to the traditional welding methods.
The brazing technology has a very good potential as a replacement for welding and riveting both in aluminium and steel.
CU-P-SN ALLOY SYSTEM WILL BE INVESTIGATED AS A POTENTIAL CHEAP (SILVER-FREE) ALTERNATIVE FOR BRAZING STEELS AT 700-750 CELSIUS DEGREES. TECHNIQUES OF PRODUCTION OF RIBBON, POWDER (FOR PASTES) AND WIRE IN THESE BRITTLE ALLOYS WILL BE DEVELOPED.
DESIRED JOINT MICROSTRUCTURES ARE TO CONTAIN DISCRETE PARTICLES OF M3P (IN PLACE OF THE CHARACTERISTIC CONTINUOUS EMBRITTLING FILM OF FE2P IF CU-P WERE TO BE USED). THE EFFECTS OF BRAZE METAL COMPOSITION, TEMPERATURE, BASE METAL, ITS SURFACE PREPARATION, FLUXES, BINDER AND BRAZING ATMOSPHERE ON JOINING WILL BE INVESTIGATED. REACTIONS, IN PARTICULAR AT THE METAL/BRAZE INTERFACE, WILL BE STUDIED BY E.G. OPTICAL AND ELECTRON MICROSCOPY, INCLUDING SEM HOT STAGE, AND MICROPROBE ANALYSIS.
BRAZING AND MECHANICAL (STATIC, DYNAMIC, FRACTURE MECHANICS) PROPERTIES OF SELECTED ALLOYS WILL BE DETERMINED. AT APPROPRIATE STAGES, PROPERTIES AND MICROSTRUCTURES OF THESE JOINTS WILL BE COMPARED WITH THOSE OF SILVER BEARING ALLOYS; IN PARTICULAR U.S. NON-DESTRUCTIVE EXAMINATION WILL BE CARRIED ON FOR BOTH SYSTEM TYPES.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales ciencias químicas química inorgánica metales de transición
- ciencias naturales ciencias físicas óptica microscopía electron microscopy
- ciencias naturales ciencias químicas química inorgánica metales de postransición
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Datos no disponibles
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
75139 Paris
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.