Objectif
Major improvements in status of the art of electron beam (EB) welding on large thickness chromium molybdenum steels have been achieved.
Beam measurements experiments were performed with a computer controlled electron beam diagnosis system, eliminating the need for complex and cost intensive welding tests to determine the optimal focus adjustments at different machines. The improved analyser is now suitable for use under industrial conditions.
Using the diagnosis system, progress has been made on the equipments investigated in the project. It was shown that, particularly in case of welding heavy thickness components, focus position, aperture, diameter and the distribution of the power density of the beam strongly influence the quality of welds.
Demonstration of defect free welds both on 100 mm and 200 mm thick chromium molybdenum material was made. Evaluation proved sufficient values for the mechanical values after post weld heat treatment. EB welding of linear or cylindrical components up to 100 mm is considered practical, without strong risks concerning the mechanical and geometrical quality of the weld. EB welding of higher thickness is still considered to be a risky undertaking, because of low reproducibility of quality. Demonstration of feasibility of good fade outs has only been partially done. Parameters and welding conditions influencing the quality of fade outs have been determined.
By nondestructive examinations (NDE), most of the typical defects occurring with electron beam welding have been detected. The only defects still needing development of adapted NDE methods are cold shuts occurring at the bottom of partial penetration welds. Use of radiographs associated with ultrasonics is strongly recommended.
High homogeneity of mechanical characteristics was reached on 2.25 chromium molybdenum steel after quality treatment. EBW welding was able to meet the most severe specifications. As this ability was directly linked to the purity of base metal, it is particularly important to specify a very high level of cleanliness of base metal.
A personal computer (PC) board control system was developed, which allows adjustment of focus current in dependence of the power and the focus position. The main innovative aspects of this system is the ability to adjust online and continuously the focus current to the respective beam power during the slope.
THE OBJECTIVES OF THIS WORK ARE AS FOLLOWS:
- DETERMINATION AND OPTIMIZATION OF THE EB WELDING PARAMETERS ON VERY THICK CR-O STEELS WHICH ARE USED IN MANY INDUSTRIAL COMPONENTS, I.E.: PRESSURE VESSELS, HEAT EXCHANGERS, GAS AND STEAM TURBINES, ETC.
THREE EB EQUIPMENTS ARE INVOLVED IN THIS PROJECT, TO COMPARE ELECTRON BEAM CHARACTERISTICS AND WELD QUALITIES ON FOUR KINDS OF CR-MO STEELS: 2 1/4 CRMO (PLATES AND CAST), 9 % CRMO, 12 % CRMO.
THE NECESSARY STEPS TO ACHIEVE THESE GOALS ARE:
- THE RELATIONSHIP BETWEEN BEAM CHARACTERISTICS, WELD QUALITY AND OCCURENCES OF DEFECTS;
- THE OPTIMIZATION OF WELDING CONDITIONS IN PARTIAL AND FULL PENETRATIONS (75 TO 200 MM);
- THE OPTIMIZATION OF THE WELDING PROCEDURE FOR A GIRTH WELD;- NON DESTRUCTIVE AND DESTRUCTIVE TESTS OF THE WELDS.
THE ACHIEVEMENTS OF THESE TESTS ARE TO ALLOW THE PERFORMANCE OF FULL SCALE MOCK-UPS AS A DEMONSTRATION OF THE RESULT VALIDITY.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- ingénierie et technologie génie électrique, génie électronique, génie de l’information ingénierie électronique système d’automatisation et de contrôle
- sciences naturelles sciences chimiques chimie inorganique métal de transition
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Nous sommes désolés... Une erreur inattendue s’est produite.
Vous devez être authentifié. Votre session a peut-être expiré.
Merci pour votre retour d'information. Vous recevrez bientôt un courriel confirmant la soumission. Si vous avez choisi d'être informé de l'état de la déclaration, vous serez également contacté lorsque celui-ci évoluera.
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
92084 PARIS LA DEFENSE
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.